3Com TokenLink 3C359 Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for Network Card 3Com TokenLink 3C359. 3Com TokenLink 3C359 8 pages. Pci network interface card
Also for 3Com TokenLink 3C359: Release Note (4 pages)
Print Page
4
Q
S
UICK
2 Connect a token ring cable to the NIC.
For cabling details, see installation instructions in Chapter 2
and connector and cabling specifications in Appendix A of
the user guide.
3 Connect the other end of the cable to a network dual
access unit (DAU), a multistation access unit (MAU),
controlled access unit (CAU), or a token ring switch.
The 3C359 NIC can operate in full-duplex mode when
attached to a Dedicated Token Ring (DTR)-enabled switch.
4 Turn the PC power on.
The PCI system automatically configures the 3C359 NIC.
5 Choose the appropriate network device driver for
your operating system environment.
6 Install the network driver from the appropriate
directory on the TokenDisk diskettes or on the
TokenDisk CD, as shown in Table 1.
Table 1 Driver Directory Locations on 3C359 NIC TokenDisk Diskettes
Driver
Microsoft NDIS 4.0
miniport
Microsoft NDIS 3.0
miniport
NDIS 2.01 OS/2
NDIS 2.01 DOS
NetWare DOS ODI
16-bit client
NetWare ODI OS/2 client 1
NetWare ODI 32-bit
client (ODI 3.3 spec.)
NetWare ODI 32-bit
server (ODI 3.3 spec.)
Microsoft NDIS 4.0
miniport
7 Verify your configuration options.
Table 2 lists the default configuration option settings of the
3C359 NIC at shipment.
T
TART FOR THE
OKEN
TokenDisk
Diskette No.
2
2
2
2
1
1
1
2
L
V
XL PCI 3C359 NIC
INK
ELOCITY
Driver Directories
\W98NT40
\W95NT351
\NDIS2\OS2
\NDIS2\DOS
\NETWARE\NWCLIENT
\
\NETWARE\CLIENT32
\NETWARE\NWSERVER\3.12
\NETWARE\NWSERVER\4.1x
\W98NT40