Aeotec 7 Pro ZWA012 User Manual - Page 7
Browse online or download pdf User Manual for Security Sensors Aeotec 7 Pro ZWA012. Aeotec 7 Pro ZWA012 14 pages. Door / window sensor
Print PageAeotec Door/Windows Sensor 7 Pro User guide : Aeotec Help Desk
Advances functions.
Screw Terminal.
With parameter #1 you can choose between the internal magnet or the external connections such as push buttons or dry
contact sensors
#1:
Ground
#2:
Digital Input
#3:
VCC (direct battery supply)
VCC + Ground terminals can be used to externally power the sensor.
Digital + VCC is used to connect the external dry contact.
Dry contact sensor.
Door / Window Sensor 7 can be converted to any type of sensor utilizing NO (Normally Open) dry contact sensors. This
can be used to detect water, magnet positions, tilt, doorbells, etc.
You can wire any dry contact sensor output to Terminal #2 and #3 (it doesn't matter which terminal is wired to where). Dry
contact terminals are only looking for Open/Close control which will have Door / Window Sensor 7 report its status
depending on the state of the dry contact output to Door / Window Sensor 7.
7 z 14
https://aeotec.freshdesk.com/support/solutions/articles/6000230465
23. 2. 2021, 19:15