Ariston A64IMCA1 Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Oven Ariston A64IMCA1. Ariston A64IMCA1 20 pages. Cooker and oven
Print Page
•
Loud whistle: heard when two induction ele-
GB
ments of the same group function simultaneously at ma-
ximum power and/or when the booster function is set on
the larger element while the other is auto-adjusted. Noise
is reduced by decreasing the power level of the auto-
-adjusted induction element; pot bottom layers made of
different kinds of materials are among the main causes
of this noise.
•
Fan noise: a fan is necessary to ensure the
hob functions correctly and to safeguard the electronic
unit from possible overheating. The fan functions at
maximum power when the large induction element is at
maximum power or when the booster function is on; in
all other cases, it works at average power depending
on the temperature detected. Furthermore, the fan may
continue to work even after switching the hob off, if the
temperature detected is high.
The types of noise listed above are due to induction
technology and are not necessarily operational faults.
! If the (-) or (+)button is pressed for an extended period
of time, the display scrolls quickly though the power
levels and timer minutes.
Initial Light Conditions
When power is initially applied to the Cooktop, the touch
control conducts a calibration process for the touch
keys, which requires a low level of ambient light in the
area of the touch keys.
If during this calibration process excessive ambient ligh-
ting is detected the User Interface displays „FL" (Infra-
red Ambient Light Error) and the control calibration pro-
cess is suspended. In order to rectify the process any
lighting that could effect the calibration process should
be switched off (e.g. halogen cooker hood lighting). The
error will disappear when satisfactory ambient lighting is
detected and the touch control calibration procedure will
now complete satisfactorily.
-The „FL" error can only be generated within approx 3s
of initial power being applied to the cooktop.
-We recommend that the user switches off all cooker
hood lighting and lighting directed towards the cooktop
when power is initially applied to the cooktop.
-After the touch control has conducted its initial cali-
bration process, (approx 3s) any cooker hood or other
lighting can be switched on as normal and will not affect
the operation of the touch control.
Switching on the hob
When power is initially applied to the Cooktop, the touch
control conducts a calibration process for the touch
keys, which requires a low level of ambient light in the
area of the touch keys. If excessive ambient lighting is
detected, the User Interface displo
ays „FL" error and the calibration is suspended. The
error will disappear when satisfactory ambient lighting is
detected and the touch control calibration procedure will
now complete satisfactorily
10
After connecting the hob to the electricity mains, the to-
uch pannel might be automatically locked. To unclock
the pannel press and hold the Control Panel
Loock button . .
To switch the hob on, press and hold the
for approximately one second.
The cooktop is switched On when a beep sound is
emmited and all the cooking zones displays show the
digit point.
When the cooktop is OFF, after 5 sec the control .
switches off the KEYLOCK LED to reduce the power
consumption.
As soon as we touch a key, the KEYLOCK LED goes
ON and we can continue to use the cooktop, unlocking
the keyboard.
Switching off the cooktop is signalled by 3 beep sound
Setting the Power Management
The cooktop maximum power limit is 7200W. This po-
wer limit can be reduced by the user to 2800W, 3500W
or 6000W.
The sequence to set a new Cooktop Power Limit is:
·During the first 30 seconds after plugging the applian-
ce
·The Touch has to be unlocked and all Heaters Off
·Press at the same time Heater 1 and Heater 3 selec-
tion keys
·Once this is done, a beep sounds and the actual Co-
oktop Power Limit will be shown in the heater displays.
For selecting a new Power Limit:
·With the (+) and (-) keys, the Power Limit is increased.
The selectable powers are: 2800W, 3500W, 6000W or
7200W. When the power is 7200W, if the [+] or [-] key
is touched the power changes to 2800W.
The sequence to finish recording the new Cooktop
Power Limit is:
·Press at the same time Heater 1 and Heater 3 selec-
tion keys
·Once this is done, new Cooktop Power Limit is recor-
ded and there is a system reset.
To finish without recording changes:
·If during 60 seconds there is no action, changes are
not recorded and there is a system reset.
button