Ariston FA3S 841 P IX A AUS Daily Reference Manual - Page 4
Browse online or download pdf Daily Reference Manual for Oven Ariston FA3S 841 P IX A AUS. Ariston FA3S 841 P IX A AUS 13 pages.
Print Page
DAILY USE
1.
SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: the display will
light up and an audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by
turning the thermostat knob. The function will not start if the
thermostat knob will be on
cooking end time (only if you set a cooking time) and a timer.
RISING
To start the "Rising" function, turn the thermostat
knob to the relevant symbol; if the oven is set to a
different temperature, the function will not start.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
Only when the oven is cold, fill
the embossing of the cavity with
the quantity of drinking water
suggested in the relative cooking
table. Place the food in the oven.
Set and activate the
function: At the end, carefully
open the door and let steam
escape slowly.
Please note: During steam cooking, do not open the door and
never top up the water.
3.
PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase is active.
When the set temperature has been reached, the icon
becomes fixed and a new audible signal will sound
to indicate that the food can be placed inside and
cooking can proceed.
Please note: Placing food in the oven before the preheating
phase has finished may have an adverse effect on the final
result of cooking.
After cooking and with the function deactivated, the
icon
may continue to remain visible on the display
even after the cooling fan has switched off to indicate
4
. You can set the cooking time,
that there is residual heat in the compartment.
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product
should be considered to be off when the pointer on the
selection knob is at " ".
.
PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing
until the
flashing on the display.
Use
or
to set the cooking time you require, then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete.
Please note: To cancel the cooking time you have set, keep
pressing
until the
then use
to reset the cooking time to "00:00". This
cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press
until the
start flashing on the display.
Use
or
to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat
knob to the temperature you require: the function
will remain paused until it starts automatically after
the period of time that has been calculated in order
forcooking to finish at the time you have set.
Please note: To cancel the setting, switch the oven off by
turning the selection knob to the
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to
to switch the oven off.
Please note: If the timer is active, the display will show "END"
icon and "00:00" start
icon starts flashing on the display,
icon and the current time
position.