Ariston KT 8104 QO User Instruction Book - Page 11
Browse online or download pdf User Instruction Book for Hob Ariston KT 8104 QO. Ariston KT 8104 QO 44 pages. Ariston cooktop user manual
Print Page
When the hob is plugged in for the first time, an audio
signal sounds after a few seconds. You can then turn on
the hob.
Power on
To turn on th power, hold your finger on the button
Heating zone controls
Each heating zone is controlled by one of the selection
buttons, whose design reflects the configuration of the
heating zones themselves
and by two power level buttons :
To turn on a heating zone and increase its power
level, select the desired heating zone. Then adjust the
power level, which is displayed in steps from 0 to 9.
To set a heating zone to maximum power
immediately , press briefly on the "-" button. The heating
zone is turned on at 100% power.
To accelerate the heating time of a heating zone, use
the "Booster" ; Adjust the power level of the heating
zone to its maximum (9).
Then press the "+" button. The Booster funtion is
activated when the number 9 is replaced by "A". Choose
the power level of the Booster (1 to 8).
The Booster stops automatically when the set
temperature is reached.
To turn off the heating zone , press on the "+" and "-"
buttons at the same time. The power level is immediately
set back to 0 and the heating zone is turned off.
or press the "-" button. The heating zone's power level
descends gradually until it is turned off.
To turn off the entire hob simultaneously , press the
button
; The entire hob is turned off.
Be sure to unlock the hob before turning it off.
4 residual heat indicator lights (C)
Even after a heating zone is turned off, its residual heat
indicator lights stays on to show that the corresponding
heating zone is still hot (temperature over 60°C). These
indicator lights warn you of the risk of injury by burning.
How to use the different controls
.
8.
8.
8.
8.
-
+
How to lock the controls
When the hob is on, it is possible to lock the controls so
that the settings cannot be changed inavertently (due to
cleaning, children playing, etc). Hold your finger over the
button
the indicator light next to the button goes on.
To modify the power level of stop cooking , all your
need to do is press the button
light goes off.
You must the reselect the desired heating zone to
reactivate the settings.
Safety features
If an object (pan, lid, etc) is left on the control zone for
more than 10 seconds or a button in the controls zone is
pressed for too long, an audio signal is triggered.
• To stop the audio signal, remove the object causing the
interruption. The hob is now turned off.
• To reactivate the controls, follow the procedure for turning
on the hob.
Models KT 6104 & 7104 only
Functioning of the double heating zones
Select the desired heating zone and press on the button
corresponding to the extension (concentric or oval) to set
the power level to its maximum.
To turn off the extension, just press the extension button
again.
How to programme the cooking time ,
It is possible to programme one heating zone (any of the
four) for a duration of up to 99 minutes.
After selecting the power level, programme the cooking
time as follows :
• Press on the programming button
• Set the desired time with the buttons
• Validate the programme by pressing a second time the
programming button.
The countdown starts immediately and continues until
the end of the programmed cooking time. An audio
signal indicates the end of the cooking time.
11
again, the indicator
8.8.
-
+