Whirlpool 220-240~volt Instructions For Installation And Use Manual - Page 7

Browse online or download pdf Instructions For Installation And Use Manual for Washer Whirlpool 220-240~volt. Whirlpool 220-240~volt 18 pages. Whirlpool washer lnstallation instructions 220/240-volt, 60-hz models
Also for Whirlpool 220-240~volt: Installation Instructions (5 pages)

Installation
Instructions
Continued
9.Grasp sides of compactor drawer and place bottom
of drawer into tracks. Lift at the handle so the front
of drawer will go over drawer stops. Close drawer.
Check if drawer opens freely. If the toe plate rubs
against floor, see "Adjusting the toe plate" for further
instructions.
Adjusting the toe plate
If the toe plate rubs the floor covering, the toe plate
clearance may be changed as follows:
a. Mark on each side of the toe plate the amount of toe
plate that rubs the floor covering.
b. Remove the drawer from the unit. (See Step 3.)
c. Use a rule and pencil or chalk to draw a line between
the marks on each side of toe plate.
d. Use scissors to cut toe plate along line.
e. Replace drawer. (See Step 9.) If toe plate still rubs
floor covering, repeat steps a-e.
6