Whirlpool 3948875 Installation Instructions - Page 3
Browse online or download pdf Installation Instructions for Washer Whirlpool 3948875. Whirlpool 3948875 5 pages. 240-volt 50-hz washer
Print Page
washers - insert
into inlet hoses
washers - insert
into inlet hoses
Attach
inlet hoses to
water
inlet valves.
connection.
ose clamp (holds
ose extension
and
rain hose together)
Preparation:
Inlet hose
connection:
Panel B
) . . . . . . . . ::::::::
. . . . . . . . . . . . . . . . >>:'
. . . . . . . .
/
Read and
then remove
label.
L
i ,:,:,:::::
:.:.:.:,:
::::::::::
. . . . . . . . . . . . . . . . . . . . ;;g:i;;;
I
Remove shipping
strap.
Completely
remove the shipping strap
l
with 2 cotter pins from the inside of the washer.
Pull firmly to remove the other
l
Read, then remove label that
covers power supply cord and drain
connector. Peel the tape down and off
each side of cabinet.
Use new hoses and washers
that
came with
your washer.
4
Attach hose to bottom inlet
l
valve opening first; then
second hose to top inlet, Tighten
couplings. DO NOT OVERTIGHTEN;
this could cause damage to couplings.
Elbow
end of hoses attaches
to
washer.
CROSSTHREAD.
3
l
Insert a flat washer into each end
of the inlet hoses. Check that washers are
firmly seated in couplings.