Whirlpool 3LWTW4840YW Product Manual - Page 8

Browse online or download pdf Product Manual for Washer Whirlpool 3LWTW4840YW. Whirlpool 3LWTW4840YW 24 pages.

Print Page

POWER CORD INSTALLATION

16.

Select plug

Select the plug that fits with the electric receptacle.

NOTE: Plug types and quantities will vary by model.

17.

Assemble plug

Assemble the plug into the end of the power cord located on

the back of the washer.

18.

Secure power cord

Secure the power cord by seating the connection on the cord

lock. Place the cord lock cover and push until it snaps. Make

sure the power cord connection is seated on the cord lock

and that the cord lock clamps correctly.

Plug power supply cord into an earthed outlet. Turn power

supply on.

COMPLETE INSTALLATION

CHECKLIST

Check electrical requirements. Be sure you have correct

electrical supply and recommended earthing method.

Check that all parts are now installed. If there is an extra

part, go back through steps to see what was skipped.

Check that you have all of your tools.

Check that yellow shipping materials were completely

removed from back of washer.

Check that water faucets are on.

Check for leaks around faucets and inlet hoses.

Remove protective film from console and any tape

remaining on washer.

Check that washer is plugged into an earthed outlet.

Dispose of/recycle all packaging materials.

Read "Washer Use" in your Washer User Instructions.

To test and clean your washer, measure 1/2 of normal

recommended amount of powdered or liquid detergent

and pour it into washer basket or detergent dispenser

(on some models). Close lid. Select any cycle. Start washer

and allow to complete full cycle.