Whirlpool 4GWTW4800 Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Washer Whirlpool 4GWTW4800. Whirlpool 4GWTW4800 27 pages.
Also for Whirlpool 4GWTW4800: Installation Instructions Manual (27 pages), Use And Care Manual (47 pages), Installation Instructions Manual (27 pages)
![Whirlpool 4GWTW4800 Installation Instructions Manual](/uploads/products/server2/6792122/6792122.png)
INSTALLATION INSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
Before you start: remove shipping materials
It is necessary to remove all shipping materials for proper
operation and to avoid excessive noise from washer.
1.
Move washer
Move washer to within 4 ft (1.2 m) of its final location; it must
be in a fully upright position.
NOTE: To avoid floor damage, set washer onto cardboard
before moving it and make sure lid is taped shut.
2.
Remove
shipping
base
Remove
packing
tray from tub
Remove tape from washer lid, open lid and remove cardboard
packing tray from tub. Be sure to remove all parts from tray.
NOTE: Keep tray in case you need to move washer later.
f4.
Free power cord
Firmly grasp power cord plug and pull to free from rear panel.
Gently place power cord over console to allow free access
to back of washer.
To avoid damaging floor, place cardboard supports from
shipping carton on floor behind washer. Tip washer back and
place on cardboard supports. Remove shipping base. Set
washer upright.
IMPORTANT:
Removing shipping base is necessary for proper
operation. If your washer includes a sound shield, please refer
to the instructions
included with the sound shield to install it at
this time.