Whirlpool 8182192 Use & Care Manual - Page 14

Browse online or download pdf Use & Care Manual for Washer Whirlpool 8182192. Whirlpool 8182192 44 pages. Front-loading automatic washer

Print Page
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water
Temperature, and Spin Speed. The preset settings provide the
recommended
fabric care for the selected cycle. See chart.
Cycle
Soil Level
Water Temp
Spin Speed
(cycle time)
Sanitary
Normal
Super Hot/Cold
Extra High
(1:55)
Whitest
Normal
Hot/Cold
Extra High
Whites
(1:00)
Heavy
Normal
Hot/Cold
Extra High
Duty
(1:20)
Normal
Normal
Warm/Cold
High
(0:40)
Bulky
Normal
Warm/Cold
Low
Items
(0:55)
Quick
Less soil
Warm/Cold
Extra High
Wash
(0:30)
Delicate/
Normal
Warm/Cold
Medium
Casual
(0:35)
Silk
Normal
Cold/Cold
No Spin
(0:26)
Wool
Normal
Cold/Cold
Medium
(o:3o)
Hand
Normal
Cold/Cold
Low
Washables
(0:30)
Soak
Normal
Warm/Cold
No Spin
(0:30)
Rinse/Spin
Normal
Cold/Cold
Extra High
(0:21)
Drain/Spin
Normal
N/A
Extra High
(0:11)
To change the preset cycle settings
Press the selector of each setting until the desired setting glows.
Normal Washer
Sounds
As with any new product, you will hear sounds that you are not
accustomed
to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
You can customize your wash by adding "Options"
to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles.
o Dd_y Wash
Pl_wash
o Ado Soak
©
Extra R_nse
Options
See the "Laundry Guide" for an overview of possible options
for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles; for example,
Prewash cannot be added to the Quick Wash cycle.
If an option is available with a selected cycle, the light for that
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Delay Wash
Use this to begin the wash cycle later.
•
Select Delay Wash until the desired time (in hours) shows in
the Estimated Time Remaining display.
•
Select START. The countdown
to the wash cycle will show in
the display window.
Prewash
Use this option for heavily soiled loads that need pretreatment.
This option adds a 15-minute prewash and drain to the main
wash cycle.
NOTES:
•
Add detergent to the Prewash and Main Wash
compartments
of the Dispenser Drawer.
•
When using Prewash, do not use liquid detergent in the Main
Wash compartment.
Use powdered detergent for the main
wash cycle.
NOTE: The Prewash and Auto Soak options cannot be selected
in the same cycle.
14