Whirlpool 8316464 Use And Care Manual - Page 6
Browse online or download pdf Use And Care Manual for Washer Whirlpool 8316464. Whirlpool 8316464 24 pages. Commercial washers
Print Page
Starting Your Washer
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Add extra detergent for
the Super cycle.
Drop a sorted load of clothes loosely into your washer.
6
Load evenly to maintain washer balance. Mix large and small
items.
Items should move easily through the wash water.
Overloading can cause poor cleaning.
To reduce wrinkling of permanent press clothes and some
synthetic knits, use a large load size to provide more space
(see step 5).
2. (OPTIONAL STEP) Pour measured liquid chlorine bleach into
the liquid chlorine bleach dispenser (on some models).
Bleach will be dispensed automatically during the wash part
of the cycle.
Never use more than 1 cup (250 mL) for a full load. Use
less with a smaller load size.
Follow the manufacturer's directions for safe use.
To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer
basket.
Use only liquid chlorine bleach in this dispenser.
3. (OPTIONAL STEP) Pour measured liquid fabric softener into
the liquid fabric softener dispenser. Softener is added
automatically during the rinse portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the crossbar in the opening.
Do not spill or drip any fabric softener on the clothes.
Use only liquid fabric softener in this dispenser.
4. Close the washer lid.
5. Push in a LOAD SIZE selector button for the correct size of
your wash load and the type of fabric being washed.
Choose a load size that allows the load to move freely for
best fabric care. See "Loading."
You may change the load size selection after the washer
has started filling by pushing in a selector button for a
different setting.