Whirlpool 859991536160 User Manual - Page 7

Browse online or download pdf User Manual for Washer Whirlpool 859991536160. Whirlpool 859991536160 19 pages.

User manual

OPTIONS

! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps) .

! If the selected function is incompatible with another previously set function the function will not be enabled.

CLEAN+

Clean+ is an option working on 3 different levels

(Intensive, Daily and Fast) that are specially designed to

set the right washing action, depending on your cleaning

needs:

Intensive

: this option is designed for high levels of

dirtiness, removing most stubborn stains .

Daily

: this option is designed to remove everyday stains .

Fast

: this option is designed to remove lightly soiled

stains .

INTENSIVE RINSE

By selecting this option, the efficiency of the rinse is

increased and optimal detergent removal is guaranteed . It is

particularly useful for sensitive skin . Press the button once,

two or three times to select an additional 1

rinses after the standard cycle rinse and remove all traces of

detergent . Press the button again to go back to the "Normal

rinse" rinse type .

START DELAY

To set the selected programme to start at a later time,

press the button to set the desired delay time . The symbol

lights on the display when this fuction is enabled . To

cancel the delayed start, press the button again untile the

value ‚''0'' is shown on the display .

FUNCTIONS

ON/OFF

To switch on the washing machine: press the

"ON/OFF"

button, the "Start/Pause"

To switch off the washing machine during the wash cycle,

press and hold the button for approximately 3 seconds . If

the button is pressed briefly or accidentally the machine will

not switch off .

To switch off the washing machine after programme end:

press the "ON/OFF"

button until the lights go off .

KNOB

To select and confirm programmes . Turn to

select .

START/PAUSE

To start the programme, after you have finished your

settings . To pause a running programme . To continue a

paused programme .

KEY LOCK

To lock the control panel, press and hold the

"Key lock"

button for approximately 3 seconds . The

symbol

will light up on the display to indicate that the

control panel has been locked (with the exception of the

"ON/OFF"

button) . This prevents unintentional changes

to programmes, especially with children near the machine .

To unlock the control panel, press and hold the "Key lock"

button for approximately 3 seconds .

generating steam to inhibit the proliferation of the main

bad odour sources inside the machine . After steam phase,

the washing machine will perform gentle tumbling through

slow rotations of the drum . FreshCare+ option starts after

the cycle ends for a maximum duration of 6h and you can

interrupt it at any time by pressing any button on control

panel or turning the knob . Wait around 5 minutes before

door can be opened .

If you want to change the temperature, press the

"temperature" button . The value appears on the display .

, 2

or 3

want to change the spin speed, press the "Spin" button . The

value appears on the display .

BLEACHING

If you wish to bleach the laundry, load the washing machine

and set the "Rinse & Spin" programme

button light up .

Start the machine and wait for it to complete the first water

filling cycle (roughly 2 minutes) . Put the machine in pause

mode by pressing the "Start/Pause"

the detergent drawer and pour the bleach (observe the

recommended doses indicated on the package) into the

main wash compartment where the partition was previously

mounted . Restart the cycle by pressing the "Start/Pause"

button .

If desired, it is possible to add fabric softener into the

appropriate compartment of the detergent drawer .

DEMO MODE

This function is only used for sales presentations . By this

you can interact with washing machine and see it working

without water . To enter Demo mode, switch the washing

machine ON and OFF again . Press and hold "Start/Pause"

button and hold both buttons for 10 seconds .

To deactivate this function, switch the washing machine

OFF . Than press and hold "Start/Pause"

5 seconds press also "ON/OFF"

buttons for 2 seconds .

FRESHCARE+

This option enhances washing performance by

TEMPERATURE

Every programme has a predefined temperature .

SPIN

Every programme has a predefined spin speed . If you

button, then within 5 seconds press also "ON/OFF"

button, open

button, within

button and hold both