Whirlpool AWI-1300 Service Manual - Page 30

Browse online or download pdf Service Manual for Washer Whirlpool AWI-1300. Whirlpool AWI-1300 39 pages.

Print Page

10. PRESENTATION OF THE P .C.B ASS'Y

Concerning Error Message

MESSAGE

Improper installation of drain hose.

The drain hose is blocked up by foreign

matter.

Drain motor is inferior.

The water tap is closed.

The water inlet filter clogged.

It passes over the 60 minutes, yet it doesn't

come to assigned water level.

Wash loads get uneven during spin.

Poor installation of the unit.

The lid is opened.

The safety switch is inferior.

The load sensing is inferior. After the load

sensing operates about 15 seconds, the

message is displayed during 0.5 second

and water level is always fixed 'high'.

The water level sensing is inferior.

CAUSE

SOLUTION

Install drain hose properly.

Remove foreign matter from drain hose.

Change drain motor.

Open the water tap.

Clean the water inlet filter.

Check whether or not is comes to the

assigned water level.

Re-set wash loads evenly.

Proper installation.

Close the lid.

Change the safety switch.

Change the P.C.B. ASS'Y.

Check the water level sensor and the

contact part of the connector.

PCB ASS'Y