Whirlpool CAE2743BQ Installation Instructions Manual - Page 8

Browse online or download pdf Installation Instructions Manual for Washer Whirlpool CAE2743BQ. Whirlpool CAE2743BQ 29 pages. Commercial washer
Also for Whirlpool CAE2743BQ: Installation Instructions Manual (28 pages)

Print Page

INSTALLATION

INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

It is necessary to remove all shipping materials for proper

operation and to avoid excessive noise from washer.

1. Move washer to within 4 ft (1.2 m) of its final location; it must

be in a fully upright position.

NOTE: To avoid floor damage, set washer onto cardboard

before moving it and make sure lid is taped shut.

2. To avoid damaging floor, place cardboard supports from

shipping carton on floor behind washer. Tip washer back and

place on cardboard supports. Remove shipping base. Set

washer upright.

iMPORTANT: Removing shipping base is necessary for proper

operation.

If your washer includes a sound shield, please refer

to the instructions

included with the sound shield to install it

at this time.

3. Remove tape from washer lid, open lid, and remove cardboard

packing tray from tub. Be sure to remove all parts from tray.

NOTE: Keep tray in case you need to move washer later.