Ariston AS60V Instruction Booklet - Page 2

Browse online or download pdf Instruction Booklet for Dryer Ariston AS60V. Ariston AS60V 12 pages.

Print Page

19504259100 English

Installation

! Keep this instruction booklet on hand in order to refer

to it when necessary. Take it with you when you move,

and, should you sell this appliance or pass it on to

another party, make sure that this booklet is supplied

along with the dryer so that the new owner may be

informed about warnings and suggestions on how the

dryer works.

! Read these instructions carefully; the following

pages contain important information on installation

and suggestions on how the appliance works.

Where to put your dryer

• Place your dryer at a distance from gas ranges,

stoves, heaters, or cook tops because flames can

damage the appliance.

• If you are going to install the appliance under a

work counter, be sure to leave a 10 mm space

between the top and any other objects on or above

the machine and a 15 mm space between the

sides and lateral furnishings or walls. This is to

ensure proper air circulation. Make sure that the

back vents are not obstructed.

• Make sure you put your dryer in an environment

that is not damp and has proper air circulation

throughout.

Ventilation

This Dryer dries your laundry by drawing in cool, clean

and relatively dry air, heating it, and then distributing it

through the clothes as they are gently tumbled. For

optimum performance, the moist air is then blown out

through a vent tube behind the dryer. When the dryer

is in use, there has to be adequate ventilation to avoid

a back flow of gases into the room from appliances

burning other fuels, including open fires.

Mobile venting

A vent tube must always be fitted when the dryer is

used in conjunction with Mobile venting. The tube

must be fitted securely into the back of the dryer

Dryer Description).

connect the tube to a permanent vent close to the

dryer. If permanent installation is not possible, the

dryer will work just as well with the tube passing

through a partly-opened window.

{PDF Created 13/11/04 12:27}

If possible, it is always best to

Ensure that the end of the tube is not directed toward

the air intake vent at the rear of the dryer.

! The vent tube should not exceed 2,4 m in length, and

should be kept free of any possible accumulation of

fluff, lint, and water by shaking it out frequently. Always

ensure that the tube is not squashed.

Permanent venting

In conjunction with the vent tube we recommend

using a Wall/Window Vent Kit, available at a retail

location or the nearest Spare Parts Dealer:

Depending upon how often you use your dryer, it is

essential that areas A and B are checked periodically

to remove lint or debris. The vent tube adaptor must

be fitted securely thus preventing any humid air from

being emitted back into the room.

! The Dryer should not be pushed so far back that the

(see

tube adaptor is pulled out of position or the tube is

squashed or bent.

! The tube should be kept clear of the air intake vent

and kinks or 'U' bends must be avoided as these will

obstruct the tube and trap condensation.

TD4001 Issue 1

Wall mounting

1. Leave an opening in

the wall to the left of

dryer's intended position.

2. Keep the tube as

short and straight as

possible

prevent

condensed

moisture

from backing up into

the dryer.

3. Similarly, the duct in the

wall should slope

downwards towards the

outside.

Window mounting

1. With a stacked dryer

the hole in the

window should ideally

be made below the

vent.

2. The tube should be

kept as short as

possible.