Whirlpool ED5KVEXVL User Instructions - Page 13

Browse online or download pdf User Instructions for Refrigerator Whirlpool ED5KVEXVL. Whirlpool ED5KVEXVL 36 pages. Whirlpool ed2gvexvd: user guide
Also for Whirlpool ED5KVEXVL: Product Dimensions (1 pages)

Print Page

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The

concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the

permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.

Substance Reduction

NSF Reduction

Aesthetic Effects

Requirements

Chlorine Taste/Odor

50% reduction

Particulate Class II

85% reduction

Contaminant

NSF Reduction

Reduction

Requirements

Lead: @ pH 6.5***

0.010 mg/L

Lead: @ pH 8.5***

0.010 mg/L

Mercury: @ pH 6.5

0.002 mg/L

Mercury: @ pH 8.5

0.002 mg/L

Benzene

0.005 mg/L

O-Dichlorobenzene

0.6 mg/L

Toxaphene

0.003 mg/L

Carbofuran

0.04 mg/L

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.85 gpm (3.2 Lpm). Pressure = 60 psig (413.7 kPa).

Temp. = 68°F to 71.6°F (20°C to 22°C). Rated service capacity = 200 gallons (757 liters).

It is essential that operational, maintenance, and filter

replacement requirements be carried out for the product to

perform as advertised.

Use replacement filter T2RFWG2, part #4396841.

2008 suggested retail price of $39.99 U.S.A./$54.95 Canada.

Prices are subject to change without notice.

Model T2WG2L: Style 1 – When the filter indicator reads 10%,

order a new filter. When the indicator reads 0%, it is

recommended that you replace the filter.

Style 2 – When the filter indicator changes from green to yellow,

order a new filter. When the indicator changes from yellow to red,

it is recommended that you replace the filter.

Style 3 – When the water filter status display changes from

"GOOD" to "ORDER," order a new filter. When the filter indicator

reads "REPLACE," it is recommended that you replace the filter.

Style 4 – Press FILTER to check the status of your water filter. If

the filter indicator light is yellow, order a new filter. If the filter

indicator light is red, it is recommended that you replace the filter.

Model T2WG2: Change the water filter cartridge every 6 months.

If the water flow to the water dispenser or ice maker decreases

noticeably before 6 months have passed, replace the water filter

cartridge more often.

Class II particle size: 1 um to <5 um

Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.

***

Compliant for Lead reduction requirements under NSF/ANSI Standard 53 as tested by Pace Analytical Services, Inc.

® NSF is a registered trademark of NSF International.

PERFORMANCE DATA SHEETS

Base Grille Water Filtration System

Model T2WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters)

Model T2WG2/T2RFWG2 Capacity 200 Gallons (757 Liters)

System tested and certified by NSF International against NSF/ANSI

Standard 42 for the reduction of Chlorine Taste and Odor, Particulate

Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury,

Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran.

Average

Influent Challenge

Influent

Concentration

2.0182 mg/L

2.0 mg/L ± 10%

1333333 #/mL

At least 10,000 particles/mL

Average

Influent Challenge

Influent

Concentration

0.1533 mg/L

0.15 mg/L ± 10%

0.1400 mg/L

0.15 mg/L ± 10%

0.0058 mg/L

0.006 mg/L ± 10%

0.0059 mg/L

0.006 mg/L ± 10%

0.0154 mg/L

0.015 mg/L ± 10%

1.7571 mg/L

1.8 mg/L ± 10%

0.015 mg/L

0.015 mg/L ± 10%

0.0819 mg/L

0.08 mg/L ± 10%

Maximum

Average

Effluent

0.06 mg/L

0.0536 mg/L

6600 #/mL

2325 #/mL

Maximum

Average

Effluent

0.0005 mg/L

0.0007 mg/L

0.0006 mg/L

0.0002 mg/L

0.0005 mg/L

0.0003 mg/L

0.0012 mg/L

0.0006 mg/L 92.22

0.0250 mg/L

0.0066 mg/L 98.58

0.001 mg/L

0.0400 mg/L

0.0213 mg/L 51.13

These contaminants are not necessarily in your water supply.

While testing was performed under standard laboratory

conditions, actual performance may vary.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after the

system.

Refer to the "Warranty" section for the Manufacturer's name,

address and telephone number.

Refer to the "Warranty" section for the Manufacturer's limited

warranty.

Application Guidelines/Water Supply Parameters

Water Supply

Water Pressure

Water Temperature

Service Flow Rate

Minimum %

Average %

Reduction

97.03

97.34

99.51

99.83

Minimum %

Average %

Reduction

99.67

99.50

99.57

96.54

91.57

94.92

96.34

99.63

93.33

74.00

City or Well

30 - 120 psi (207 - 827 kPa)

33° - 100°F (0.6° - 37.8°C)

0.85 gpm (3.2 Lpm) @ 60 psi