Whirlpool 3WSC19D4XW00 User Instructions - Page 16

Browse online or download pdf User Instructions for Refrigerator Whirlpool 3WSC19D4XW00. Whirlpool 3WSC19D4XW00 24 pages.

Print Page

Removing and Replacing the Ice Storage Bin:

1. Press down the release lever and tilt the bucket outward. Use

both hands to hold the base of the storage bin, then lift it up

and out.

A. Release lever

NOTE: It is not necessary to turn the ice maker control to the

OFF (right) position when removing the storage bin. The

sensor cover ("flipper door"), located on the right wall of the

freezer door, stops the ice maker from producing ice if the

door is open or the storage bin is removed.

A. On/Off switch

B. Sensor cover

2. Replace the bin by sliding it onto the door, then tilting it back

into an upright position. The release lever will click when the

bin is securely in place.

Style 2

Turning the Ice Maker On/Off:

To turn ON the ice maker, simply lower the wire shutoff arm.

To manually turn off the ice maker, lift the wire shutoff arm to

the OFF (arm up) position and listen for the click. Ice can still

be dispensed, but no more can be made.

NOTE: The ice maker has an automatic shutoff to keep the

storage bin from overfilling during normal operation. As ice is

made, the ice cubes will fill the ice storage bin, and the ice cubes

will raise the wire shutoff arm to the OFF (arm up) position. Do not

force the wire shutoff arm up or down.

Removing and Replacing the Ice Storage Bin:

1. Pull the covering panel up from the bottom.

2. Lift the wire shutoff arm so it clicks into the OFF (up) position.

3. Lift up the front of the storage bin and pull it out.

4. Replace the bin by pushing it in all the way or the dispenser

will not work.

5. To restart ice production, push the wire shutoff arm down to

the ON position. Make sure the door is closed tightly.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

Water Filter Status Indicator

The water filter status indicator, located on the control panel's

display screen, will help you know when to change your water

filter.

When the water filter is in good condition, the water filter

status indicator icon does not appear on the control panel.

When the control panel's water filter status indicator icon

appears in orange, this tells you that it is almost time to

change the water filter. It is recommended that you order a

replacement filter when the orange icon appears.

Replace the water filter when the water filter status indicator

icon changes from orange to red.

If water flow to your water dispenser or ice maker decreases

noticeably, change the filter sooner. The filter should be replaced

at least every 6 months, depending on your water quality and

usage.

After changing the water filter, reset the status indicator by

pressing and holding the RESET ALARM button for

3 seconds. When the system is reset, the water filter status

indicator icon will disappear from the display screen.

Water Filtration System

(on some models)