Ariston ASL70C Instruction Booklet - Page 2

Browse online or download pdf Instruction Booklet for Dryer Ariston ASL70C. Ariston ASL70C 12 pages.

Print Page

1. Troubleshooting

19504265000 English.

Installation

! Keep this instruction booklet on hand in order to refer to

it when necessary. Take it with you when you move, and,

should you sell this appliance or pass it on to another

party, make sure that this booklet is supplied along with

the dryer so that the new owner may be informed about

warnings and suggestions on how the dryer works.

! Read these instructions carefully; the following pages

contain important information on installation and

suggestions on how the appliance works.

Door Reversal Instructions

The door of your Dryer is reversible and can easily be

changed. Exchange diagonally hinge brackets and

blanking plugs. Exchange door latch and catch with their

opposite blanking plates. See diagram above.

Where to put your dryer

• Place your dryer at a distance from gas ranges,

stoves, heaters, or cook tops because flames can

damage the appliance.

• If you are going to install the appliance under a work

counter, be sure to leave a 10 mm space between the

top and any other objects on or above the machine

and a 15 mm space between the sides and lateral

furnishings or walls. This is to ensure proper air

circulation. Make sure that the back vents are not

obstructed

Ventilation

• When the dryer is in use, there has to be adequate

ventilation. Make sure you put your dryer in an

environment that is not damp and has proper air

circulation throughout. Airflow around the dryer is

essential to condense the water produced during the

washing, the dryer will not operate efficiently in an

enclosed space or cupboard.

! If using the dryer in a small or cold room some

condensation could be experienced

{PDF Created 13/11/04 11:53}

Water Drain

If your dryer is installed next to a drain the water can be

plumbed into this drain. This does away with the need to

empty the water container. Simply remove the top hose

from its top fitting at the rear of the dryer and plumb the

hose provided to the drain.

Electrical connection

Make sure of the following before you insert the plug into

the electrical socket:

• The socket must be grounded.

• The socket must be able to sustain the machine's

maximum power, which is indicated on the rating label

(see Dryer Description).

• Power voltage must be within the values indicated on

the rating label (see Dryer Description).

• The socket must be compatible with the dryer's plug.

Should this not be the case, replace the plug or the

socket.

! The dryer must not be installed outdoors, even if the

space is sheltered. It can be very dangerous if exposed to

rain or storms.

! Once installed, the dryer's electrical wire and plug must

be within reach.

! Do not use extension cords

! The power cord must not be bent or squashed.

! The power cord should be checked periodically and

replaced by a cord specially prepared for this dryer and

fitted only by authorised technicians. (see Service). New

or longer power cords are supplied at an extra charge by

authorised dealers.

Ensure that any portable outlet or extension lead is

positioned so that it is not subjected to any splashing or

ingress of moistures

! The manufacturer denies any responsibility should any

of these rules not be followed.

! If in doubt about any of the above consult a

qualified electrician

Before you start using your dryer

Once you've installed your dryer and before you use it,

clean the inside of the drum to remove any dust that

could have accumulated during transportation.

TD4023AUS Issue 1