Cal-Comp BC3200 Quick Manual - Page 2

Browse online or download pdf Quick Manual for Headsets Cal-Comp BC3200. Cal-Comp BC3200 4 pages.

Print Page
a.
if red indicator light flashes: power consumption
b.
if blue indicator light flashes slowly: 60% battery power
c.
if green indicator light bright always: fully battery power
Turning On & Off the Headset
<On> Simultaneously press the switch more than 3 seconds, the indicator light will start flashing 1.2 seconds and the
speaker will have audio tones for turn on.
<Off> Continuously press the switch more than 3 seconds, the indicator light will start flashing 1.2 seconds and the
speaker will have audio tones for turn off
Pairing Your Headset and Phone
1.
Make sure the headset turn on
2.
Press volume-up or down button and Multi-function button over 3 seconds until the indicator light shows blue (the
first phone) or green (the second phone)
3.
If search successful, it will appear BC3200 from the found device
4.
Select " BC3200 " from the found device listed on the phone screen to pair the headset and the phone.
5.
Enter "0000" as the password when asked. Successful pairing makes the indicator light flash 10 times rapidly.
6.
If the phone fails to connect to the headset automatically after paring, click the MFB once, the headset will try to
connect to the phone, and the phone may ask you to confirm the connection with the headset, please select "Yes".
Try again if failed.
7.
The pairing mode will keep 90 seconds continuously. If failed or over time, you could follow the step 1 to try again.
8.
If you want to start pair mode for headset with the second phone, please execute pair mode for 1~5 steps
repeatedly
Change Different Device
The indicator light will change color and spread out audio tones when you press switch shortly
1.
Blue indicator light and spread out audio tones
2.
Green indicator light and spread out audio tones two times
Answer & Reject Calls
It will send out lower to higher warning notice when you have a call and indicator light shows blue color (the first phone) or
green color (the second phone) flash rapidly. At this time you could answer a call according to press MFB shortly or reject
the call according to press MFB long.
Switch Communication Channel
If your headset have two calls from two mobile phone, you could press switch shortly and choice which one you want to
answer. At this time another one will be hold and you can answer this call to press switch shortly.
Close a Call
Press MFB shortly and it will became standby mode. If you want to close one call, only need press switch into connection
and press MFB shortly.
please being charging ASAP
it could be use normal
*Effective range (10 m)
The first device
The second device