Whirlpool WUR35X24HZ Use & Care Manual - Page 8
Browse online or download pdf Use & Care Manual for Refrigerator Whirlpool WUR35X24HZ. Whirlpool WUR35X24HZ 36 pages. Under counter refrigerator
Also for Whirlpool WUR35X24HZ: Use & Care Manual (36 pages)
Print Page
Stocking the Beverage Center
1.
Start stocking the beverage center with the bottom
display rack.
2.
Place juices, sodas or other canned beverages on the
glass shelves.
Lighting the Beverage Center
The beverage center has an interior light that comes on any time
the door is opened. You may also turn the light on at any time by
opening the door and pressing the exterior switch located beside
the temperature control knob on the base grille.
NOTE: Leaving the light on for an extended period of time will
slightly increase the temperature of the beverage center.
8
BEVERAGE CENTER CARE
Cleaning
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Clean the beverage center about once a month to avoid odor
buildup. Wipe up spills immediately.
To clean your beverage center:
1.
Unplug beverage center or disconnect power.
2.
Remove all racks and shelves from inside the beverage
center.
3.
Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
Do not use abrasive or harsh cleaners such as window
■
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls with
■
a mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
4.
Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners, or cleaners containing
chlorine. These can scratch or damage materials. Dry
thoroughly with a soft cloth.
NOTE: To keep your stainless steel beverage center
looking like new and to remove minor scuffs or marks, it
is suggested that you use the manufacturer's approved
Stainless Steel Cleaner and Polish. To order the cleaner,
see "Accessories."
IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly with a soft cloth.
5.
Replace the racks and shelves.
6.
Clean the condenser coils regularly. They are located behind
the base grille. Coils may need to be cleaned as often as
every other month. This may help save energy.
Remove the base grille. See "Base Grille."
■
Use a vacuum cleaner with an extended attachment to
■
clean the condenser coils when they are dusty or dirty.
Replace the base grille.
■
7.
Plug in beverage center or reconnect power.