Whirlpool WUR50X24HZ Use & Care Manual - Page 5

Browse online or download pdf Use & Care Manual for Refrigerator Whirlpool WUR50X24HZ. Whirlpool WUR50X24HZ 36 pages. Under counter refrigerator
Also for Whirlpool WUR50X24HZ: Use & Care Manual (32 pages), Use & Care Manual (36 pages)

Print Page

Unpack the Refrigerator

Excessive Weight Hazard

Use two or more people to move and install

Refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

•

Remove tape and glue residue from surfaces before

turning on the Refrigerator. Rub a small amount of liquid

dish soap over the adhesive with your fingers.

Wipe with warm water and dry.

•

Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove tape or

glue. These products can damage the surface of your

Refrigerator. For more information, see "Refrigerator

Safety".

•

Dispose of/recycle all packaging materials.

When Moving Your Refrigerator:

Your Refrigerator is heavy. When moving the

Refrigerator for cleaning or service, be sure to cover the

floor with cardboard or hardboard to avoid floor

damage. Always pull the Refrigerator straight out when

moving it. Do not wiggle or "walk" the Refrigerator

when trying to move it, as floor damage could occur.

The new chassis has wheels at the back to easily move

the product for longer distances.

Clean Before Using

After you remove all of the package materials, clean the

inside of your Refrigerator before using it. See the

cleaning instructions in "Refrigerator Care".

Important information to know about glass

shelves and covers:

Do not clean glass shelves or covers with warm water

when they are cold. Shelves and covers may break if

exposed to sudden temperature changes or impact,

such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and

covers are heavy. Use both hands when removing them

to avoid dropping.

Reverse Door Swing (optional)

Tools Needed:

Phillips screwdriver and an 8 mm wrench (or 5/16" in

wrench).

1. Unplug Refrigerator or disconnect power.

2. Using the screw driver, remove the screws from each

side of the top of the Refrigerator cabinet and set aside.

NOTE: There are seven screws total. Do not discard.

3. Remove the top hinge and set aside.

4. Lift the door straight up and off

the bottom hinge.

5. Set door lying flat with gasket facing up.

Door should be placed on a debris free surface

such as cardboard or blanket to avoid scratches.

6. Remove the screws (B) fastening the black metal door

stopper (C) and re-attach it on the opposite side.

BOTTOM VIEW

7. Remove the screws from each side of the kickplate and

set aside.