Whirlpool WVE26622 NFW Manual - Page 11

Browse online or download pdf Manual for Refrigerator Whirlpool WVE26622 NFW. Whirlpool WVE26622 NFW 11 pages.

8.2. FAILURES

In the event of operation alarms, they will also be displayed in the digits LEDs, (e.g. Failure1, Failure 2, etc...) call

After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon

letter on the digit display blinks according to failure code described below:

Failure code

Error 2

Error 3

Error 6

9. AFTER-SALES SERVICE

Before contacting After-Sales Service:

Switch the appliance on again to see if the problem

has been solved. If it has not, disconnect the appliance

from the power supply and wait for about an hour

before switching on again.

If, after performing the checks described in the

Troubleshooting Guide and switching the appliance

on again, your appliance still does not work properly,

contact the After-sales Service, explain the problem.

Specify:

• the model and appliance serial number (stated on

the rating plate),

• the nature of the problem,

F letter blink on/off at 0,5 sec. Blinks ON 2 times

then remain off for 5 seconds. Pattern repeats.

F letter blink on/off at 0,5 sec. Blinks ON 3 times

then remain off for 5 seconds. Pattern repeats.

F letter blink on/off at 0,5 sec. Blinks ON 6 times

then remain off for 5 seconds. Pattern repeats.

Visualization

• the Service number (the number after the word

SERVICE on the data plate on the inside of the

appliance),

• your full address,

• your telephone number and area code.

Note:

The direction of door opening can be changed. If this

operation is performed by After-sales Service it is not

covered by the warranty.

lights up and the F