Clam 16609 Manual - Page 7

Browse online or download pdf Manual for Fishing Equipment Clam 16609. Clam 16609 19 pages.

Print Page

1. LAYOUT POLES TOGETHER ON FLOOR AND ASSEMBLE TO SWIVEL PLATES WITH

FASTENERS AS SHOWN

2. SCREW IN THE PROPER SCREWS INTO PLATE DO NOT OVERTIGHTEN.

3. WHILE HOLDING THE SCREW IN PLACE START TO THREAD THE NYLOCK NUT ONTO

THE SCREW AND TIGHTEN BY HAND UNTIL RESISTANCE IS FELT. THEN USING 7/16 SOCKET

OR WRENCH CONTINUE TO TIGHTEN NUT UNTIL IT IS EVEN WITH END OF SCREW. DO NOT

OVERTIGHTEN.

STEP-5

SLIDE CLIP ONTO POLE AND SNAP INTO THE TWO HOLES

LOCATED ON THE HOOP BEFORE ADDING FASTENERS.

INTO

DO NOT USE NUT

WITH THIS SCREW.

POLES SHOULD MOVE

EASILY, DO NOT OVERTIGHTEN