AEQ Phoenix Mobile Application Note - Page 6

Browse online or download pdf Application Note for Recording Equipment AEQ Phoenix Mobile. AEQ Phoenix Mobile 8 pages. Audio codec system
Also for AEQ Phoenix Mobile: Application Note (8 pages)

Print Page

If the line "Select contact" presents a different name than AEQMaster_IP at its right,

just select this line and press "Select" key. The call book will be presented. Just select

AEQMaster_IP from the list, press OK to close the list and then finally press the green

key.

If the contact was not already created in the Call Book, you can create it from the

menu:

Main screen

create a new contact with the following parameters:

Contact: AEQMaster_IP

Module Type: IP

URI:

[email protected]

When PROXY SIP = ON , the unit understands that, if "@sip.aeq.es" is omitted,

the destination is registered in the same server as this unit.

Speed Dial (n): leave it as it was.

•

The top line at the screen displays (usually very fast) the status of the call, and

the different phases it goes through: Calling, Synchronizing and finally

Connected.

•

The second line should show AEQMaster_IP

•

The third line should show

If the remote unit is busy, the top line will show "Busy (486) "

•

Verify that the LED at the side of TX PROG SYNC key is lit green, as an

indication that the communication has been successfully established and

synchronized. If the key above HP1 is activated (illuminated) and the

corresponding fader is open, the audio received from Phoenix Master should be

heard at the headphones.

Once the connection is OK, you can retry as many times as needed varying the

selected audio coding scheme in order to get the best possible quality allowed by

the network (Wizard Menu

The list of available coding algorithms can be created in Menu

Link Profiles

Select

5. SENDING A CALL TO ANOTHER PHOENIX OR N/ACIP COMPATIBLE CODEC

The test call sent to AEQMaster_IP has been automatically answered. In order to

make a manual call to other codec, you must configure the second one the same way

as the first unit, provided that it is also connected directly to a DHCP modem-router. If it

is not, just follow the corresponding Internet access (AN0C to AN0F) application note.

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:

ADVANCED

2. Contacts. With the help of the user manual,

or the current audio coding scheme.

G722

Sel Codec).

APLICACIONES ELECTRONICAS QUASAR S.A.

ADVANCED