Clam 14477 Manual - Page 4

Browse online or download pdf Manual for Shelters Clam 14477. Clam 14477 7 pages. Thermal hub shelter

Print Page

6. Your shelter should be standing up completely (Photo 6).

Anchor the shelter to the ice by using ice anchors and

straps.

Screw ice anchors into the ice near the corners of the

shelter using Clam's Ice Anchor Installation Tool PN

108348 (not included). Feed the adjustable strap grommet

onto the ice anchor and cinch the strap tight (Photo 7).

Repeat for each anchor drilled into the ice. In windy

conditions you may need to screw an anchor outside the

shelter several feet away from the hub on the windward

side and attach a strap found in the pockets under each

side panel hub from the hub eye bolt to the remote anchor.

Adjust strap so that it is snug between hub and anchor.

This will help keep the shelter in place and the walls from

collapsing. If more anchors are needed, order PN 108064

(pack of two) via www.clamoutdoors.com.

Page 4

SET-UP INSTRUCTIONS

Ice Anchors in corners. Shelter is

secured to the ice by hooking the

grommet on the strap to the anchor and

cinching the strap tight.

Photo 6

Photo 7