Whirlpool WED97HEXL User Manual - Page 19

Browse online or download pdf User Manual for Dryer Whirlpool WED97HEXL. Whirlpool WED97HEXL 24 pages. Electronic dryer
Also for Whirlpool WED97HEXL: Instruction Manual (8 pages), Use And Care Manual (36 pages)

Print Page

DOOR REvERSAL (OPTIONAL)

The following instructions are for models with a

round-shaped door.

ImPoRTAnT: For models with a square shaped door, an

additional kit is needed. Please contact your retailer, or see the

For Assistance or Service page in your Use and Care Guide.

Tools needed:

Min. 8" long Torx

T25

screwdriver

Remove door from dryer

ImPoRTAnT: If the protective film has not yet been

removed from the dryer, peel the film from the dryer

door before proceeding.

Using a Torx

T25 screwdriver, remove the 4 screws securing

the door hinge to the dryer and lift up and out to remove the

door. Place the door on a soft towel or other non-scratch

surface. Reinstall the 4 screws in the holes.

† ® TORX is a registered trademark of Saturn Fasteners, Inc.

#2 Phillips screwdriver

move the door strike

Using a Torx

T25 screwdriver, remove the 2 screws securing

®†

the door strike to the door frame of the dryer. Rotate the

strike 180° and attach to the opposite side of dryer door

frame, as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.