Whirlpool 29" Wide Models Installation Instructions Manual - Page 7
Browse online or download pdf Installation Instructions Manual for Dryer Whirlpool 29" Wide Models. Whirlpool 29" Wide Models 20 pages. Dryer
Also for Whirlpool 29" Wide Models: Installation Instructions Manual (48 pages), Installation Instructions Manual (22 pages)
Print Page
Install Leveling Legs
1.
Prepare dryer for leveling legs
To avoid damaging floor, use a large flat piece of cardboard
from dryer carton; place under entire back edge of dryer.
Firmly grasp dryer body (not console panel) and gently lay
dryer down on cardboard.
2.
Screw in leveling legs
Using a wrench and tape measure, screw legs into leg holes
until bottom of foot is approximately 1/2" (13 mm) (to match
height of 3.6 cu. ft. capacity washer) or 1½" (38 mm) (to
match height of 3.8 cu. ft. capacity washer) from bottom of
dryer.
Now stand the dryer on its legs. Slide the dryer until it is
close to its final location. Leave enough room for electrical
connection and to connect the exhaust vent.
7