Whirlpool 3978906 Installation Instructions Manual
Browse online or download pdf Installation Instructions Manual for Dryer Whirlpool 3978906. Whirlpool 3978906 10 pages. Gas dryer set to operate on natural gas
Print PageHave questions about your dryer?
Check your Use and Care Guide for a toll-free number to call, or call your
dealer. The dealer is listed in the Yellow Pages of your phone directory
under "Appliances — Household — Major — Service and Repair."
When you call, you will need the dryer model number and serial number.
Both numbers are on the model/serial rating plate located in the door well
behind the dryer door and on front of opening.
Record the numbers here for handy reference:
Model No.
Serial No.
Moving dryer to a new location?
Check with your gas supplier or dealer to confirm that your dryer is
equipped with the correct burner for the particular type of gas in your new
home. Burner information is specified on the model/serial rating plate.
Disconnect bracket from wall and
reinstall in new home. (Not used
on all models.)
Shut off electrical supply
to dryer. Unplug power
supply cord and tape it
securely to dryer.
Shut off gas supply valve in
the gas supply line.
Disconnect gas fittings from
dryer and cap gas supply
line. Tape end of dryer gas
pipe.
Slide dryer onto cardboard
or hardboard before moving
it across the floor to prevent
damaging floor covering.
Installation Instructions
Tape lint
collector lid to
cabinet.
Tape top
to cabinet.
Tape door
to front
panel.
Turn leveling
legs all the
way in.
IMPORTANT:
Read and save these instructions.
Installer:
Homeowner:
For best performance,
Save
Gas
Set to operate on NATURAL GAS.
Part No. 3978906
Leave Installation Instructions with homeowner.
Keep Installation Instructions for future reference.
install dryer according to Installation
Instructions. Failure to complete installation as instructed
could void warranty.
Installation Instructions for local electrical inspector's use.
Dryer