Whirlpool 7MWED6605MC Use And Care Manual - Page 27

Browse online or download pdf Use And Care Manual for Dryer Whirlpool 7MWED6605MC. Whirlpool 7MWED6605MC 41 pages. Electric dryer / gas dryer

Print Page

Whirlpool 7MWED6605MC Use And Care Manual

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are

registered, touch the control panel with your fingertip, not your fingernail. When selecting a setting or option, simply touch the

appropriate button.

STEAM MODELS

NON-STEAM MODELS

POWER

Touch to turn the dryer on and off. Touch to stop/cancel

a cycle at any time.

WHAT TO DRY/HOW TO DRY

Once a "What to Dry" is selected, the dryer automatically

selects the recommended or last-used "How to Dry"

option, as well as the recommended/last-used modifiers.

Both the "How to Dry" and modifiers can be changed if

desired. See the "Cycle Guide" for details.

START/PAUSE

Touch and hold until LED counts down "3-2-1" and the

dryer starts; then let go to start a cycle, or touch once

while a cycle is in process to pause it.

MODIFIERS

Use to select available modifiers for your dryer. Not all

cycles and options are available on all models.

Temp

When using Timed Dry/Quick Cycle, you may select

a dry temperature based on the type of load you are

drying. Use the warmest setting that is safe for the

garments in the load. Follow garment label instructions.

NOTE: Automatic Cycles will give you up to four

temperatures to adjust, depending on the model and

the "What to Dry" or "How to Dry" selections that have

been made.

Dryness

You may adjust the Dryness on Automatic Cycles

(except for the Sanitize cycle), if desired.

NOTE: Dryness is for use with Automatic Cycles only.

More Time/Less Time Timed Dry Adjust

Touch MORE TIME or LESS TIME with the Timed Dry/

Quick cycle to increase or decrease the length of the

cycle.

OPTIONS

Use to select available options for your dryer. Not all

cycles and options are available on all models.

Wrinkle Shield Option

If you will be unable to remove a load immediately,

touch WRINKLE SHIELD to add up to 150 minutes of

periodic tumbling to help reduce wrinkling. You may

select the "+ Steam" setting (on some models) to add

a short steam cycle after 60 minutes to help smooth

out wrinkles.

NOTE: If you open the dryer door prior to the end

of the Wrinkle Shield option, the dryer will go into

standby.

Cycle Signal

Use this option to turn the signal indicating the end

of a drying cycle to low, medium, high, or off. The

volume you select here will also be applied to the

Damp Dry Signal.

NOTE: You may also turn off the tones that sound

when a feature, setting, or option is touched. Touch

and hold CYCLE SIGNAL for about 3 seconds to turn

sounds to low, medium, high, or off.

Damp Dry Signal

Touch to turn the Damp Dry Signal on or off. When

selected, a series of beeps will sound when the load

is damp, but not completely dry. This will allow you to

take clothes out of the load that do not need to dry