AEQ DA-26 User Manual - Page 3

Browse online or download pdf User Manual for Amplifier AEQ DA-26. AEQ DA-26 7 pages. Mono / stereo analogue audio distribution amplifier

Print Page

1. Equipment description.

The DA-26 is an analogue audio distribution amplifier with 2 input audio channels and 12 output

audio channels. Both inputs and outputs are transformer balanced.

You can configure the DA-26 to work in Mono or Stereo mode. In Mono mode 1 input and 12

outputs are available. In Stereo mode 2 inputs and 6 outputs per input are available.

You can change the working mode just by pushing a button located on the front panel.

Independent gain control (between -∞ and +15 dB) is provided for each individual output.

All the outputs are adjusted by default with a gain of 0 dB. Due to the load impedance of the

equipment that are receiving the distributed signal or due to different level requirements, in

some installations it may be necessary to make a little gain adjustment in order to get the

desired output level. You can use an oscillator as input generator and use a trimmer to regulate

the front potentiometers in order to adjust each output level.

The equipment receives power through the connector designed for that purpose (located on the

back panel), using the cable supplied. The equipment may be operated with alternating voltage

of between 90V and 250V at 50 or 60 Hz. Maximum consumption is approximately 45W.

To turn on the equipment, you must activate the power switch (ON position) located on the front

panel. If all instructions have been correctly followed, the Power ON LED will light up, indicating

that the equipment is receiving power.

DA-26

Mono / Stereo Analogue Audio Distribution Amplifier