Whirlpool CABRIO WGD8200YW2 Use And Care Manual - Page 7
Browse online or download pdf Use And Care Manual for Dryer Whirlpool CABRIO WGD8200YW2. Whirlpool CABRIO WGD8200YW2 36 pages. Electronic dryer
Print Page
CYCLE GUIDE --
CYCLES
Settings
and options
shown
in bold
are default
settings
for that cycle.
Not all features
and cycles
are available
on all models.
Not all settings
and options
are available
on each cycle.
Default
cycle times
are estimated
in minutes.
Time Adjust
Adjusting
drying
time on Timed
Dry Cycles
Est.TimeRernaining
When you select
a Timed
Dry Cycle,
the default
time appears
in the display.
Use the Time Adjust
buttons
to increase
or decrease
the time in 1 minute
increments.
Press and hold to change
the time
in 5 minute
increments.
The maximum
dry time is 90 minutes.
Selecting
the Temp
A High heat setting
may be used for drying
heavyweight
items such as towels
and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight
items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,
or heat-sensitive
fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Default
•
_
Time:
Small loads and
sportswear
Any load
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive
fabrics
Small to medium
loads
Quick Dry
Timed Dry
Touch Up
(for non-steam
models)
High
Medium
Low
Extra Low
Air Only
High
Medium
Low
Extra Low
Air Only
High
Medium
Low
Extra Low
Air Only
13
4O
2O
A a,able
Options:
Wrinkle Shield t
Wrinkle Shield t
Wrinkle Shield t
cycle Details:
For small loads of 3-4 items.
i@
se to dry items to a damp level for items that do
not require an entire drying cycle. Select a drying
temperature
based on the type of fabrics in your
load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting.
Use this setting to help smooth out wrinkles from
such items as garments packed in a suitcase or
garments wrinkled from being left in the dryer.
t Or Wrinkle Shield
TM
with Steam (on some models). Wrinkle Shield
TM
with Steam is available only with High and Medium Temp settings.
CYCLE GUIDE-
CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Items to
Drying
Default
refresh:
Cycle:
Temperature:
Time:
Mixed loads
Enhanced
High
22
Touch Up
Medium
Wrinkle Shield t
Static Reduce
Use to reduce odors and light wrinkles from small to
medium-sized
loads of dry items. Dry time will
automatically
adjust when the load size is sensed.
Cycle run time cannot be manually adjusted.
Temperature is selectable.
Do not add dryer sheets.
Shirts, blouses,
Quick
Medium
12
Wrinkle Shield t
_
The Quick Refresh cycle is best for reducing light
and slacks
Refresh
Static Reduce
_
wrinkles and odors from dry garments, including
(on some
loads left in the dryer. For the Quick Refresh cycle,
models)
time is selectable
in 5 minute increments,
based on
the load to be refreshed.
Or Wrinkle Shield
TM
with Steam (on some models). Wrinkle Shield
TM
with Steam is available only with High and Medium Temp settings.
Load Size Recommendations
For best results, follow the load size recommendations
noted for
each cycle.
Q
mall load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
_
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.