Whirlpool Cabrio,- WED7300X Install Manual - Page 2

Browse online or download pdf Install Manual for Dryer Whirlpool Cabrio,- WED7300X. Whirlpool Cabrio,- WED7300X 16 pages. Top-loading high efficiency low-water washer
Also for Whirlpool Cabrio,- WED7300X: Use And Care Manual (40 pages), Use And Care Manual (40 pages), Use And Care Manual (36 pages), Use And Care Manual (32 pages), Use And Care Manual (40 pages), Use And Care Manual (40 pages), Dimensions And Installation Information (1 pages), Dimension Manual (2 pages), Use And Care Manual (40 pages), Use & Care Manual (48 pages), Use And Care Manual (40 pages), Use And Care Manual (40 pages), Use And Care Manual (40 pages), Use & Care Manual (44 pages), Use & Care Manual (19 pages), Use & Care Gude (44 pages), Use & Care Manual (44 pages)

Print Page
Whirlpool Cabrio,- WED7300X Install Manual

INsTaLLaTION reQUIreMeNTs

TOOLS AND PARTS

Gather required tools and parts before starting installation.
Tools needed:
Adjustable or open end
wrench
/
" (14 mm)
9
16
4" min
(102 mm)
Wood block
Pliers that open to 1
⁄
"
9
16
(39.5 mm)
Optional tools:
Flashlight
Parts supplied:
NOTE: All parts supplied for installation are in
cardboard insert in the top of the washer.
Beaded Tie Strap
2
Level
Ruler or measuring tape
Bucket
Drain hose with clamp
Parts needed:
(Not supplied with washer)
Inlet hoses with flat washers
To order, please refer to toll-free phone numbers on back page of
your Use and Care Guide.
8212656RP
10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP
5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212646RP
4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP
5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
n
(2 pack)
8212487RP
5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP
6 ft. (1.8 m) Nylon braided inlet hose, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
8212637RP
6 ft. (1.8 m) Inlet hose, Black EPDM, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please refer to
toll-free numbers on back page of your Use and Care Guide.
If you have:
Overhead sewer
1" (25mm) standpipe
Drain hose too short
Lint clogged drain

LOCaTION reQUIreMeNTs

Select proper location for your washer to improve performance and
minimize noise and possible "washer walk". Install your washer in
a basement, laundry room, closet or recessed area.
42"
(1067 mm)
You will need:
Standard 20 gal. (76 L) 39"
(990 mm) tall drain tub or utility
sink, sump pump and connectors
(available from local plumbing suppliers)
2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter Kit
Part Number 280130
Kit Part Number 280131
Drain protector,
Part Number 367031
27
/
"
1
27"
2
(648 mm)
(686 mm)