Whirlpool Duet GGW9200LW Use & Care Manual - Page 10
Browse online or download pdf Use & Care Manual for Dryer Whirlpool Duet GGW9200LW. Whirlpool Duet GGW9200LW 48 pages. Electronic gas dryer
Print Page
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left
side, or through the bottom.
Fire Hazard
Cover unused exhaust holes with one of the
foJtowing kite:
279818 (white)
279925 (biscuit)
Contact your JocaJ deaJer.
FaiJure to follow these instructions
can reeuJt in
death, fire, electrical
shock, or serious
injury.
1
2
1. Standard rear offset exhaust installation
2. Left or right side exhaust installation
3. Bottom exhaust installation (Not an option with
pedestal installations.)
Alternate
installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance
installations are shown.
Refer to the manufacturer's
instructions.
i
"i--
-
i
i
I
= ,_"
i
i/
_s
1
2
1. Over-The-Top installation (also available with one
offset elbow)
2. Periscope installation
NOTE: The following kits for close clearance alternate
installations are available for purchase. Please see the
"Assistance
or Service" section of this manual to order.
•
Over-The-Top Installation:
Part Number 4396028
•
Periscope Installation (For use with dryer vent to wall vent
mismatch):
Part Number 4396037 - 0 in. (0 cm) to 18 in. (45.72 cm)
mismatch
Part Number 4396011 - 18 in. (45.72 cm) to 29 in. (73.66 cm)
mismatch
Part Number 4396014 - 29 in. (73.66 cm) to 50 in. (127 cm)
mismatch
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Determine
Vent Length
1. Select the route that will provide the straightest and most
direct path outdoors. Plan the installation to use the fewest
number of elbows and turns. When using elbows or making
turns, allow as much room as possible. Bend vent gradually
to avoid kinking. Avoid 90 ° turns.
2.
Determine vent length.
The maximum length of the exhaust system depends upon:
•
The type of vent (rigid metal or flexible metal).
•
The number of elbows used.
•
The type of hood.
Recommended
hood styles are shown here.
1
(10,2 cn_}
(10.2 era)
1. Louvered hood style
2. Box hood style
10