Whirlpool Duet WED9150WW0 Installation Instructions Manual - Page 9
Browse online or download pdf Installation Instructions Manual for Dryer Whirlpool Duet WED9150WW0. Whirlpool Duet WED9150WW0 16 pages. 27" electric dryer
Also for Whirlpool Duet WED9150WW0: Use And Care Manual (25 pages)
Print Page
13. connect
remaining
wires
Connect remaining wires to outer terminal block screws. Tighten
screws. Finally, reinsert tab of terminal block cover into slot of
dryer rear panel. Secure cover with hold-down screw. Now, go to
Venting Requirements,
4oWIRE DIRECT
WIRE
CONNECTION
Prepare your 4=wire cable for direct connection:
Direct wire cable must have 5 ft. (1.52 m) of extra length
so dryer may be moved if needed.
Strip 5" (127 mm) of outer covering
from end of cable, leaving bare
ground wire at 5" (127 mm).
Cut 11/2" (38 mm) from remaining
3 wires. Strip insulation back 1"
(25 mm). Shape ends of wires into
hooks.
To connect wires to terminal block,
place hooked end of wire under
terminal block screw, facing to the
right, squeeze hooked end together
and tighten screw.
15,
Connect
neutral
ground
wire
and neutral
wire
Connect neutral ground wire and place hooked end (hook
facing right) of neutral wire (white or center wire) of direct wire
cable under center screw of terminal block. Squeeze hooked
ends together and tighten screw.
16, Connect ground wire
*
i
Connect ground wire (green or bare) of direct wire cable
to external ground conductor
screw. Tighten screw.
ground
wire and neutral wire
1 7, Connect
remaining
wires
e
Remove center, silver-colored
terminal block screw. Remove
neutral ground wire from external ground conductor screw.
Place hooked ends of remaining direct wire cable wires under
outer terminal block screws (hooks facing right). Squeeze
hooked ends together and tighten screws. Finally, reinsert tab
of terminal block cover into slot of dryer rear panel. Secure
cover with hold-down
screw. Now, go to Venting
Requirements.
9