Whirlpool WGD9400SZ3 Use And Care Manual - Page 7

Browse online or download pdf Use And Care Manual for Dryer Whirlpool WGD9400SZ3. Whirlpool WGD9400SZ3 29 pages. Duet / duet steam electronic dryer

Whirlpool WGD9400SZ3 Use And Care Manual
Results may vary depending on fabric. 100% cotton
garments with wrinkle-free
finish may yield better
results than those without.
100% cotton items may
require additional touching up after the Steam Cycle.
Use of fabric softener sheet is not recommended
with
Steam Cycles. It may cause temporary staining on
clothes.
It is not recommended
to use Steam Cycles for items that
have been starched. Wash any starched or new garments
prior to using a Steam Cycle.
The Refresh Cycle is best for smoothing out wrinkles and
reducing odors from loads consisting of one to four dry
items of wrinkle-free cotton, cotton-polyester
blend,
common knits, and synthetic garments.
The Touch Up Cycle is best for smoothing out wrinkles
from clothes that have been left in the dryer too long. For
best results, do not overload the dryer.
The Refresh Cycle time is set for 15 minutes and is not
adjustable. Under certain environmental
or installation
conditions, you may experience under drying with the
Refresh Cycle. Select Touch Up Cycle (20 min. default
time) which can be customized to select High Temperature
and/or additional cycle time by pressing the Timed Cycle
Adjust More Time button.
NOTE: Not all cycles are available on all models.
Select the drying cycle that matches the type of load you are
drying. See Automatic
Preset or Manual Preset Cycle Settings
chart.
Steam
models
CASUAL
DELICATE
SUPER
DELICATE
DAMP DRY
AUTOMATIC C YCLES
TIMED
QUICK DR_
Non-Steam
models
BULKY ITEMS
HEAVY DUTY
SANITIZE
STEAM CYCLES
IUICK REFRESH
NHANCED
TOUCH U P
CASUAL
DELICATE
SUPER
DELICATE
DAMP DRY
AUTOMATIC
CYCLES
BULKY ITEMS
HEAVY DUTY
MANUAL CYCL[S
TIMED DRY
]UCH UP
UICK DRY
Cycle Control knob
Automatic Cycles
Automatic Cycles allow you to match the cycle to the load you are
drying. See the following Automatic
Preset Cycle Settings chart.
Each cycle dries certain fabrics at the recommended
temperature.
A sensor detects the moisture in the load and automatically
adjusts the drying time for optimal drying.
Sanitize
Use this cycle for items such as towels, bedding, children's
clothing, or other items needing to be sanitized. This cycle is
designed to eliminate 99.9% of 3 common infectious bacteria.
This cycle should be run to completion to ensure sanitization.
For best results, do not interrupt cycle.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
Automatic
Preset Cycle Settings
Automatic Cycles
Temperature
Est.
Load Type
Cycle
Time*
(Minutes)
SANITIZE
High
60
Towels, bedding,
children's clothing
HEAVY DUTY
High
50
Heavyweight items, towels, jeans
BULKY ITEMS
Medium
55
Jackets, comforters, pillows
NORMAL
Medium
40
Corduroys, work clothes, sheets
CASUAL
Low
35
Permanent press, synthetics
DELICATE
Low
30
Lingerie, blouses, washable
woolens
SUPER DELICATE
Extra Low
25
Lingerie, blouses, washable
woolens
DAMP DRY
Low
20
Clothes to come out suitable
for ironing
*Reset time to complete drying, if needed.
Manual Cycles
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the DRY TIME up or down buttons.
Manual Preset Cycle Settings
Manual Cycles
Load Type
Temperature
Est. Cycle
Time*
(Minutes)
TIMED DRY
Heavyweight items,
bulky items, bedspreads,
work clothes
High
40
QUICK DRY
High
21
Small loads
*Reset time to complete drying, if needed.