Whirlpool WGT3300SQ - Gas Laundry Center User Instructions - Page 6
Browse online or download pdf User Instructions for Dryer Whirlpool WGT3300SQ - Gas Laundry Center. Whirlpool WGT3300SQ - Gas Laundry Center 28 pages. Combination washer/electric dryer
Also for Whirlpool WGT3300SQ - Gas Laundry Center: Installation Instructions Manual (28 pages), Specifications (8 pages)
Print Page
For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.
Heavy Work Clothes
Mixed Load
2 pair of pants
2 double sheets
3 shirts
4 pillowcases
3 jeans
6 T-shirts
1 coverall
6 pair of shorts
2 shirts
2 blouses
6 handkerchiefs
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Drop a sorted load of
clothes loosely into your washer.
■
Load evenly to maintain washer balance. Mix large and
small items. Items should move easily through the wash
water. Overloading can cause poor cleaning.
2. (OPTIONAL) Add liquid chlorine bleach.
Always measure liquid chlorine bleach. Do not guess. Do not
use more than 1 cup (250 mL) for a full load. Follow
manufacturer's directions for safe use. Use a cup with a
pouring spout to avoid spilling.
Let the washer fill and begin agitating the load. Add bleach to
the wash cycle so it can be removed in the rinse cycle. Pour
bleach around the agitator, not directly onto the load.
■
Follow directions on the care labels. Do not use chlorine
bleach on wool, silk, spandex, acetates, or some flame-
retardant fabrics.
NOTE: Undiluted bleach will damage any fabric it touches.
The damage appears as rips, holes, tears, or color loss and
may not show up until several washings later.
6
WASHER USE
Loading
LARGE CAPACITY WASHERS
Towels
Delicates
8 bath towels
2 camisoles
8 hand towels
4 slips
10 washcloths
6 undergarments
1 bath mat
2 sets of sleepwear
1 child's outfit
Starting Your Washer
3. (OPTIONAL) Add liquid fabric softener.
NOTE: Do not spill or drip any fabric softener onto the clothes.
Undiluted fabric softener can stain fabrics. Always dilute fabric
softener with warm water. Too much fabric softener can make
some items (diapers and towels) nonabsorbent. If this
happens, do not use it in every load, or use less of it in each
load.
Style 1: With liquid fabric softener dispenser (on some
models)
■
Use only liquid fabric softener in this dispenser. Pour
measured liquid fabric softener into the dispenser.
Softener is added automatically during the rinse portion
of the cycle. Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the
crossbar in the dispenser opening.
Style 2: Without liquid fabric softener dispenser (on some
models)
■
In the final rinse ONLY, add fabric softener that has been
diluted with ½ to 1 cup (125 to 250 mL) warm water.
4. Close the washer lid. Washer will not agitate or spin with the
lid open.
5. Turn the WATER LEVEL selector to the correct setting for your
wash load and the type of fabric being washed. You may
change the load size or water level selection after the washer
has started filling by turning the selector to a different setting.
6. Set the TEMPERATURE selector to the correct setting for the
type of fabric and soils being washed. Use the warmest water
safe for fabric. Follow garment label instructions.
NOTE: In wash water temperatures colder than 60ºF (15.6ºC),
detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the
surface of garments).
Permanent Press
Knits
1 double sheet
2 pair of pants
1 tablecloth
2 blouses
1 dress
4 shirts
1 blouse
4 tops
2 pair of pants
2 dresses
3 shirts
2 pillowcases