Whirlpool WHP80250 Quick Manual - Page 4

Browse online or download pdf Quick Manual for Dryer Whirlpool WHP80250. Whirlpool WHP80250 4 pages.

Print Page

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

TROUBLESHOOTING

In order to receive a more complete assistance,

please register your product on

Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.

www.whirlpool.eu/register

Malfunction

Possible cause

The plug is not inserted into the socket.

The tumble

The plug is faulty.

dryer does not

turn on.

A power failure occurred.

The door is open.

A time delay for the cycle start was set.

The tumble

The button Start/Pause was not pressed to start

dryer does not

the program.

start.

The function Key Lock was enabled (in case of

machines equipped with this option).

An appropriate maintenance was not carried

out.

The programme, the time and/or the drying

level set are not suitable for the type and the

amount of load inserted into the dryer.

The drying

times are very

The garments are too wet.

long.

The dryer may be overloaded.

Room temperature.

The programme

A power failure occurred might have occurred.

did not end.

Programme

fi nishes and

clothes are

Small load.

damper than

expected.

Lights on or fl ashing

Water tank

The water tank is full.

Door fi lter

Failure of the air fl ow necessary for machine

and/or bottom

operation.

fi lter*

Bottom fi lter*

The bottom fi lter requires cleaning.

DEMO

The dryer is in DEMO mode. The DEMO

The cycle lasts

indicator is on.

few minutes.

The presence

of wrench

The machine sensors detected a failure.

symbol signals a

malfunction.

*Note: some models are self-cleaning and not equipped with bottom fi lter. Please refer to the section Care & Maintenance.

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.whirlpool.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.

Before using the appliance carefully read the Safety Instructions.

Solution

Insert the plug into the socket.

Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, as adapters or extensions.

Await the reactivation of the power supply.

Close the door.

For machines equipped with this function: await the end of the delay

set or switch the machine off to reset it. Refer to the section Options.

Press the button Start/Pause.

Refer to the option section and, if the Key Lock is present, disable it.

Switching the machine off is not enough to disable this option.

Refer to the section Care & Maintenance and perform the operations

described.

Refer to the section programmes and options to fi nd the programme

and the options most suitable for the type of load.

Carry out a washing cycle with higher spin speed to remove as much

water as possible.

Refer to the programme section to check the max. load for each

programme.

The drying time may be longer if the room temperature falls outside the

14–30°C range.

In case of power failure, it is necessary to press the button Start/Pause

to restart the cycle.

The automatic programme has not sensed the required fi nal moisture

and the dryer will complete the programme and stop. If this happens

simply select an additional short period of drying or select extra dry

option if available.

Empty the water tank. Refer to the section Care & Maintenance.

Clean the door fi lter and the bottom one and check whether air

intake is free. Carrying out these operations improperly may cause

damages.

Clean the bottom fi lter. Refer to section Care & Maintenance.

Disable the DEMO mode. The following actions must be carried out

in sequence, without breaks. Switch the machine on and then switch

it off again. Press the Start/Pause button until the buzzer is heard.

Switch the machine on again. The "DEMO" indicator fl ashes and then

turns off .

Switch the dryer off and unplug it. Open the door immediately and

pull laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits fl ashing on the display.

For instance: F3 and E2.

xxxx

xxxxxxxxxxxx

W11538217

03/2021