Whirlpool YWED72HEDW Use & Care Manual - Page 13

Browse online or download pdf Use & Care Manual for Dryer Whirlpool YWED72HEDW. Whirlpool YWED72HEDW 41 pages. Electronic dryer

Print Page

Cycle Status Indicators

Appearance may vary.

The Cycle Status Indicators show the progress of a cycle.

Not all indicators are available on all models.

Check Vent

This indicator will show the status of airflow through the

dryer and dryer vent system for the dryer's life. During the

sensing phase at the beginning of the cycle, the Check Vent

light will come on if a blocked vent or low airflow issue is

detected. This light will stay on for the entire cycle. The

light will be cleared when selecting a new cycle, touching

POWER, or opening the door after the cycle has completed.

This feature is available during Automatic and Steam cycles

only. For more information on maintaining good airflow, see

"Check Your Vent System for Good Airflow."

NOTE: If there are other error issues during a cycle, the

Check Vent indicator will not light up. See "Troubleshooting"

section.

Eco Monitor

The Eco Monitor allows you to see how the settings you

select affect your energy usage within the cycle chosen.

The Eco Monitor indicator may change, depending on the

options and modifiers selected.

Wet

The load is still wet and/or the cycle just started.

Damp

This indicator shows that the load is partially dried and items

that you may wish to hang up or iron while still damp may

be removed.

Cool Down

The dryer has finished drying with heat, and is now tumbling

the load without heat to cool it down and reduce wrinkling.

Done

This will indicate that the selected cycle has ended and

the load may be removed from the dryer. If Wrinkle Shield

option has been selected, the dryer may continue to tumble

the load, even if the Done indicator is lit.

Sensing

The Sensing indicator will light during Automatic Cycles to

indicate that the moisture sensor on the dryer is operating.

This indicator will not light during Manual Cycles or options

such as Wrinkle Shield.

Static Reduce

This indicator will light when the Static Reduce function

is active.

NOTE: Static Reduce is not available on all cycles.

Steaming

This indicator will light when the Steam function is active.

NOTE: Steam is not available on all cycles.

Wrinkle Shield

Option

™

This indicator will light if the Wrinkle Shield

selected and is running. The dryer will periodically tumble

the load for up to 140 minutes after the cycle has ended.

Additional Features

To purchase a drying rack for your dryer, order by calling

1-877-944-7566. You will need your model and serial

number and the purchase date. Remove and discard

any packing material before use.

Use the Drying Rack for items that you do not want to

tumble dry, such as sweaters and tennis shoes. When you

use the drying rack, the drum continues to turn, but the rack

remains stationary.

The drying rack is intended for use with the Manual Dry/

Timed Dry cycles only. The drying rack cannot be used

with Automatic cycles.

To use the drying rack:

IMPORTANT: Do not remove the lint screen.

1. Open dryer door.

2. Align the two hooks on the front of the drying rack with

™

option has been

USING THE DRYING RACK

the holes in the dryer door opening and press down fully

into holes. Rest the rear support on the dryer back ledge.

3. Place wet items on top of the drying rack. Allow space

around items for air to circulate. The drying rack does

not move, but the drum will rotate; be sure to leave

adequate clearance between items and the inside of

the dryer drum. Make sure items do not hang over the

edges or between drying rack grille.

4. Close the door.

5. Select a Timed Dry/Air Only, or Low Temperature cycle.

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using the Air Only setting.

6. When the cycle is selected, the Estimated Time

Remaining display shows the default time. You can

change the actual time in the cycle by increasing or

decreasing the cycle time.

7. Start the dryer.

NOTE: Check the lint screen and remove any lint

accumulated from items dried on the drying rack

after the cycle is finished.