3Com 3CRWEASY96A Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Network Hardware 3Com 3CRWEASY96A. 3Com 3CRWEASY96A 8 pages. Wireless lan outdoor bridge solution

Print Page

309-2273-001AA.fm Page 5 Monday, February 3, 2003 4:54 PM

Connect the Bridge to the Power Supply and

the LAN

You can connect to the LAN either through the 3Com power supply or through IEEE 802.3af power-

over-Ethernet compliant equipment.

Using the Power Supply

The power supply can be located indoors at any point between the bridge and the LAN access port

where an accessible power outlet exists.

Connect the cable coming from the bridge to the port labeled To Access Point on the power supply.

Connect another Ethernet cable from the port labeled To Hub/Switch on the power supply to an

Ethernet LAN port, as shown.

CAUTION: To avoid damaging network equipment, make sure that the cables are

connected from bridge to power supply to LAN as shown and described above.

Using a Power-Over-Ethernet LAN Port

If your LAN equipment complies with the IEEE 802.3af power-over-Ethernet standard, you can connect

the bridge directly to a LAN port. For example, the illustration shows the connection through a 3Com

Ethernet Power Supply to a 3Com SuperStack

Switch.