FirePro FP520V User Manual
Browse online or download pdf User Manual for Smoke Alarm FirePro FP520V. FirePro FP520V 4 pages.
Print Page
Document nr.: FP520V_Manual
Revision nr.: A
Revision date: 04-03-2022
Moun
Place the moun
te on the desired installa
•
where the holes should be drilled.
Drill two holes with a diameter of 5 millimetres.
•
Push the plas
to the holes.
•
Insert the screws into
•
the moun
te,
ten them
firmly into the plugs.
Place the smoke alarm
•
on the moun
bracket and secure it
by turning it clockwise.
Test the correct
•
opera
our
smoke alarm by
pressing the test
on. If no sound is
generated, the smoke
alarm is not
operly
and should not be
used!
Alarm silence facility
When the smoke alarm has detected smoke and turns into the alarm
mode, you can mute the alarm for approx 10±1 minutes by pressing
the cause of the alarm and make sure that the circumstances are safe.
Opera
Visual (flash)
Normal
1 x per 40 seconds
Test
1 x per second (3 x) /
pause of 1,5 seconds
2x per seconds for
Wireless test
5 minutes
Alarm
1 x per second (3 x) /
pause of 1,5 seconds
Wireless alarm
None
Alarm silence
1 x per 8 seconds
Low ba ery warning
1 x per 40 seconds
Connected low ba ery warning
1 x per 3 hours
Low ba ery warning silence
None
Fault warning
None
-10-
Low ba ery mode
a
When the ba ery is running low, the smoke alarm will indicate this with
a r
e beep and flash for approximately 30 days. WARNING: This
smoke alarm is equipped with a non-replaceable ba ery. When this
warning occurs, replace the device as soon as possible! The acous
ba ery warning signal can be muted for ten hours by pressing the test
Ceiling
on. The smoke alarm is s
when it's in this mode.
Fault warning mode
When the smok
fault warning mode. Try cleaning the smoke alarm (see paragraph
maintenance) or replace the smoke alarm!
Maintenance
Test this smoke alarm weekly for correct opera
•
facility. If the smok
beep. Due to the loudness of the alarm, make sure that you always
stand at arm's length distance from the unit when you are tes
the smoke alarm does not generate an acous
alarm must be replaced immediately!
Clean the smoke alarm at least once per month to remove dirt, dust or
•
debris. Use a v
and covers of the smoke alarm. Do not remove the top cover of the
smoke alarm to clean it inside.
Do not a empt to repair this smoke alarm. If the smoke alarm shows a
•
damage related t
Tr
•
Recycling and disposal
The WEEE symbol means that this product and ba eries
must be disposed separately from other household waste.
When they reach their end of life, take them to a designated
waste c
recycling. Protect the environment, human health and natural resources!
Acous
None
1 x per seconds (3 x) /
pause of 1,5 seconds
2x per seconds for
10 seconds
1 x per seconds (3 x) /
pause of 1,5 seconds
2 x per seconds
None
1 x per 40 seconds
1 x per 3 hours
None
1 x per 40 seconds
o detect smoke
operly, it will turn into the
est
orrectly, it will generate a loud
e
acuum all sides
, it must be replaced!
en caused by dust or steam.
t in your area to guarantee a safe disposal or
operly
Device is being tested
Device is being connected test，
Device has detected smoke
Detected other devices had smoke alarm
Smoke alarm is muted
Ba ery is running low
Ba ery of connected device is running low
Low ba ery warning is muted
operly
-11-
SMOKE ALARM
FP520V USER MANUAL
Iden
a
Product type :
Smoke alarm
Item number :
FP520V
Manufacturer :
FIREPRO
138 – 140 Bayfi eld Road East,
Bayswater North, VIC, 3153, Australia
E-MAIL:
info@fi reproaus.com
Website:
altamonte.com.au
AS3786:2014+A1:2015+A2:2018
ESSENTIAL CHARACTERISTICS: PASSED
Nominal acti vati on conditi ons/ Sensiti vity, Response delay (response ti me) and
Performance under fire conditi on - Operati onal reliability - Tolerance to supply
voltage - Durability of operati onal reliability and response delay, temperature
resistance, vibrati on resistance, humidity resistance, corrosion resistance, electrical
stability
Download the Declarati on of Performance at www.altamonte.com.au