Whirlpool 30 " Eye-Level Gas Range Installation Instructions Manual - Page 24

Print Page

Adjust Oven Broil Burner Flame (if needed)

Press BROIL, then press the start pad. Look through the oven

window to check broil burner for proper flame. This flame should

have a ½" (1.3 cm) long inner cone of bluish-green, with an outer

mantle of dark blue, and should be clean and soft in character.

No yellow tips, blowing or lifting of flame should be present.

If flame needs to be adjusted:

1. Press the off pad. Let the oven cool.

2. Loosen the lock screw on the air shutter located at the rear of

the broil burner.

3. Adjust the air shutter as needed.

4. Tighten lock screw.

5. Close the oven door. Press BROIL, then press the start pad.

Look through the oven window to check broil burner for

proper flame. If flame needs to be adjusted, repeat steps 1-5.

A. Lock screw

B. Air shutter