Whirlpool 30 " Eye-Level Gas Range Installation Instructions Manual - Page 5

Print Page

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured

Home Construction and Safety Standard, Title 24 CFR, Part 3280

(formerly the Federal Standard for Mobile Home Construction

and Safety, Title 24, HUD Part 280). When such standard is not

applicable, use the Standard for Manufactured Home

Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the

current standards CAN/CSA-A240-latest edition, or with local

codes.

Mobile home installations require:

■

When this range is installed in a mobile home, it must be

secured to the floor during transit. Any method of securing

the range is adequate as long as it conforms to the standards

listed above.

Product Dimensions

This manual covers several models. Your model may appear

different from the models depicted. Dimensions given are

maximum dimensions across all models.

Model KSGB900

³⁄₁₆

A. 1

" (3.0 cm) height from

cooktop to top of vent

⁷⁄₈

B. 29

" (75.9 cm)

C. Model/serial number plate

(located behind the oven door on

the top right-hand side of the

oven frame)

D. 36" (91.4 cm) height to top of

cooktop edge with leveling legs

screwed all the way in*

IMPORTANT: Range must be level after installation. Follow the

instructions in the "Level Range" section. Using the cooktop as a

reference for leveling the range is not recommended.

*Range can be raised approximately 1" (2.5 cm) by adjusting the

leveling legs.

⁵⁄₁₆

E. 28

" (71.9 cm) max.

depth from front of console

to back of range.

⁷⁄₈

F. 28

" (73.3 cm) max. depth

from handle to back of

range.