Whirlpool 99044506A Installation Instructions And Use And Care Manual - Page 8

Browse online or download pdf Installation Instructions And Use And Care Manual for Ventilation Hood Whirlpool 99044506A. Whirlpool 99044506A 28 pages. 30" (76.2 cm) and 36" (91.4 cm) range hood

Print Page

Wall Venting

To make a 4" x 10½" (10.2 cm x 26.7 cm) rectangle in the wall:

1. Make 2 lines by measuring from floor 65 " (167.3 cm) and

62 " (158.4 cm) or

" (3.2 mm) and 3 " (9.2 cm) down from

underside of cabinet and mark on the centerline on the back

wall.

2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline

on the wall.

3. Use saber or keyhole saw to cut a rectangular opening in the

wall for the vent.

Cabinet

front

(3.2 mm)

(9.2 cm)

Style 2 - Cut Openings for 3¼" x 10" (8.3 x 25.4 cm)

Rectangular Vent to 7" (17.8 cm) Round Vent Transition

Roof Venting

To make a 4" x 10½" (10.2 x 26.7 cm) rectangular cutout on

the underside of cabinet bottom:

1. Mark lines 1½" (3.8 cm) and 5½" (14.0 cm) from the back wall

on the centerline of the underside of cabinet.

2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline

on the underside of cabinet.

3. Use saber or keyhole saw to cut a rectangular opening for

vent.

*5 / "

(14 cm)

*From wall, not cabinet frame

To make a circular vent opening on the underside of the

cabinet top:

1. Mark a centerline on the underside of the top of cabinet.

2. Mark a line " (12.7 cm) from the back wall on the underside

of the top of cabinet.

3. Use a compass or a circle template to draw a circle with a

diameter that is ¼" (0.64 cm) larger than the vent.

Centerline

5 "

(13.3 cm)

*1 / " (3.8 cm)

5 / "

(13.3 cm)

5 / "

(13.3 cm)

4. Use saber or keyhole saw to cut the circular vent opening.

Circular vent opening

*5"

(12.7 cm)

*From wall, not

cabinet frame

Install Vent System

1. Install vent through the vent opening in upper cabinet or wall.

Complete venting system according to the selected venting

method. See "Venting Requirements" section.

2. Use caulking to seal exterior wall or roof opening around the

cap.

Install Range Hood

1. Remove bottom cover screws and bottom cover.

A. Bottom cover screws

B. Bottom cover

2. Remove filters. See "Range Hood Care" section.

3. Remove terminal box cover.

A. Terminal box cover screws

B. Terminal box cover

Cabinet

cutouts