Whirlpool AKR 503 IX Instructions For Use - Page 4
Browse online or download pdf Instructions For Use for Ventilation Hood Whirlpool AKR 503 IX. Whirlpool AKR 503 IX 4 pages. Extractor or filtering hood
![Whirlpool AKR 503 IX Instructions For Use](/uploads/products/server2/6871671/6871671.png)
SAFEGUARDING THE ENVIRONMENT
1. Packing
Packaging materials are 100% recyclable and are marked with the
recycling symbol . Dispose of the appliance in conformity with local
environmental regulations. Packaging materials (plastic bags,
polystyrene, etc.) can be dangerous for children and should be kept
well out of their reach.
2. Product
This appliance is marked according to the European directive
2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is scrapped suitably, you can help
prevent potentially damaging consequences for the environment and
health.
The symbol
on the product or the accompanying documentation
indicates that this product should not be treated as domestic waste
but must be taken to a suitable collection centre for the recycling of
electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental
regulations for waste disposal.
For further information on the treatment, recovery and recycling of
this product, contact the competent local office, the household
waste collection service or the shop where you purchased the
appliance.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
IMPORTANT!
•
The appliance is not intended for use by young children or
persons with restricted physical, sensory or mental
abilities or without experience and knowledge of the
appliance, unless they are under the supervision or
instruction of a person responsible for their safety.
•
Children must be supervised to ensure that they do not play
with the appliance.
1. Do not connect the appliance to the mains power supply until
installation has been completed. Always disconnect the hood
before cleaning or carrying out maintenance by unplugging it or
switching off the power supply.
2. Do not "flambé" food under the hood. Naked flames could
cause a fire.
3. Do not leave pans unattended when frying. Cooking oil can catch
fire.
4. Regular cleaning and maintenance is essential to correct
functioning and good performance. Regularly remove dirt
deposits. Regularly clean or replace filters. Never use flammable
materials as hoses for extracted air.
5. If the hood is used together with other appliances powered by
gas or other fuels, ambient negative pressure must not exceed
-5
4 Pa (4 x 10
bar). For this reason, make sure the room is
adequately ventilated.
6. Exhaust air must not be conveyed through the same flue used by
the heating system or other appliances powered by gas or other
fuels.
7. The room must be adequately ventilated when the hood is used
together with appliances powered by gas or other fuels.
8. Make sure lamps are cold before touching them.
9. Exhaust air must not be conveyed through a flue used for
removal of fumes produced by gas combustion appliances or
other combustible materials, but must have an independent
outlet.
All national regulations governing extraction of fumes must be
observed.
10. The hood is not a shelf, therefore do not overload or place
objects on it.
11. Do not use or leave the hood without its lamps correctly
installed - risk of electric shock.
Note: Always wear work gloves for all installation and maintenance
operations.
5019 318 33273
PL
CZ
SK
H RUS BG RO
Electrical connections
The mains power supply must match the voltage given on the
dataplate located inside the hood. If provided with a plug, connect
the hood to a power socket complying with current regulations and
located in an accessible area. If it does not have a plug (direct
connection to the power supply) or if the socket is not in an
accessible place, fit a suitable double-pole switch that ensures
complete disconnection from the power supply in category III
overvoltage conditions, complying with the installation rules.
IMPORTANT: Before reconnecting the hood circuit to the
mains power supply and checking correct operation, make
sure the power cable is correctly fitted and that it was NOT
crushed in the housing during installation.
Cleaning the hood
Warning! Failure to remove oil/grease (at least once a month) could
result in fire.
Use a soft cloth with a neutral detergent. Never use abrasive
substances or alcohol.
Before using the hood
To ensure best use of your hood, please read these instructions
carefully and keep them for future reference.
Packaging materials (plastic bags, polystyrene, etc.) can be dangerous
for children and should be kept well out of their reach.
Make sure the hood was not damaged during transport.
Declaration of conformity
This product has been designed, manufactured and sold in
conformity to the following standards:
-
safety objectives of "Low Voltage" Directive 2006/95/CE
(which replaces 73/23/CEE as amended)
-
protection requirements of the "EMC" Directive 89/336/CEE
amended by Directive 93/68/CEE.
Troubleshooting guide
The hood does not work:
•
Is the plug properly inserted in the power socket?
•
Is there a power failure?
The hood is not extracting enough:
•
Is the right speed selected?
•
Do the filters need cleaning or changing?
•
Are the air outlets blocked?
The light does not work:
•
Does the lamp need replacing?
•
Is the lamp correctly fitted?
AFTER-SALES SERVICE
Before calling the After-Sales Service
1. Check to see if you can solve the problem yourself (see
"Troubleshooting guide").
2. Switch the hood off and then on again to check if the problem
has been eliminated.
3. If the problem persists, contact the After-sales Service.
Specify:
•
the nature of the problem,
•
the product model given on the dataplate inside the hood, visible
on removing the grease filters,
•
your full address,
•
your telephone number and area code,
•
the Service code (the number under the word SERVICE on the
dataplate inside the hood, behind the grease filter).
If any repairs are needed, contact an authorized Service Centre (to
ensure that only original spare parts are used and that repairs are
made correctly).
Failure to comply with these instructions can compromise the safety
and quality of the product.
GB