Whirlpool AKR 951 Instructions For Use Manual - Page 7

Browse online or download pdf Instructions For Use Manual for Ventilation Hood Whirlpool AKR 951. Whirlpool AKR 951 9 pages. 100cm island curved glass cooker hood, akr 951/1 ix
Also for Whirlpool AKR 951: Installation Sheet (10 pages), Installation Sheet (20 pages)

Whirlpool AKR 951 Instructions For Use Manual

Electrical connection

The mains voltage must match that given on the rating plate
located inside the hood. If provided with a plug, connect the
hood to a socket complying with the current regulations and
located in an accessible area. If it does not have a plug (direct
connection to the power supply) or if the plug is not in an
accessible place, fit a suitable double-pole switch that ensures
complete disconnection from the power supply in category III
overvoltage conditions, complying with the installation rules.
WARNING: Before reconnecting the hood circuit to the
power supply and checking correct operation, always make sure
the power cable is correctly fitted and that it was NOT crushed
in its housing during installation. Make sure to have this operation
carried out by a specialised technician.

Cleaning the hood

WARNING! Failure to remove oil/grease (at least once a
month) could result in fire.
Use a soft cloth with a neutral detergent. Never use abrasive
substances or alcohol.
Before using the hood
Please read these instructions carefully and keep them for future
reference, in order to ensure best use of your hood.
The packing materials (plastic bags, polystyrene, etc.) are a
potential source of danger and must be kept out of the reach of
children.
Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and put on the
market in conformity with:
- safety objectives of the "Low Voltage" Directive 2006/95/EC
(which replaces 73/23/EEC as amended)
- protection requirements of "EMC" Directive 89/336/EEC
amended by Directive 93/68/EEC.

Troubleshooting guide

If the hood does not work:
Is the plug properly inserted in the power socket?
Is there a power failure?
If the hood is not extracting enough:
Is the right speed selected?
Do the filters need cleaning or replacing?
Are the air outlets blocked?
If the lamp does not work:
Does the lamp need replacing?
Is the lamp correctly fitted?
5019 318 33303
AFTER-SALES SERVICE
Before calling the After-Sales Service
1. Check to see if you can fix the problem yourself (see
"Troubleshooting Guide").
2. Switch the appliance off and then on again to check if the
problem has been eliminated.
3. If the problem persists, contact the After-Sales Service.
Specify:
the type of fault,
the product model given on the dataplate inside the hood,
visible on removing the grease filters,
your full address,
your telephone number and area code,
the Service code (the number under the word SERVICE on
the dataplate inside the hood, behind the grease filter).
If any repairs are necessary, contact an authorised Service Centre
(to ensure the use of original spare parts and correct repair).
Failure to comply with these instructions can compromise the
safety and quality of the product.
TR GB