Whirlpool AKR473.1/IX Health & Safety, Use & Care And Installation Manual - Page 6

Browse online or download pdf Health & Safety, Use & Care And Installation Manual for Ventilation Hood Whirlpool AKR473.1/IX. Whirlpool AKR473.1/IX 15 pages.

Print Page

MATERIAL SUPPLIED

Remove all the components from the packets. Check that all the components are included.

• Hood assembled with motor, lamps and grease filters installed.

• Instructions for assembly and use

• 1 power supply cable

• 1 allen key

• 1 cable clamp

•

screws 3.5x9.5

• 4 screws 4.2x35

• 2 adjuster brackets

INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS

The hood is designed for installation and use in "Extractor version" or in "Filter version".

Extractor Version

Fumes are extracted and expelled to the outside through an exhaust pipe (not supplied) fixed to the hood exhaust pipe connector

Depending on the exhaust pipe purchased, provide for suitable fixing to the exhaust pipe connector

IMPORTANT: If already installed, remove the carbon filter/s.

Filter Version

Air is filtered through the carbon filter/s and recycled into the surrounding environment.

IMPORTANT: Check that air recirculation is ensured.

If the hood does not have the carbon filter/s, order one/them and fit before use.

Install the hood away from very dirty areas, windows, doors and heat sources.

The hood comes with all the materials necessary for installation on the majority of walls/ceilings. However, a qualified technician must ensure that the materials

are suitable according to the type of wall/ceiling.

INSTALLATION DIMENSIONS

Wall unit interior 760 mm min.

900 mm min.

Adjacent wall units

centre line

65 cm (gas or combi cookers)

50 cm (electric cookers)

This type of hood must be installed inside a wall unit or similar support.

260 mm

Adjacent wall units

GB12