Whirlpool GXW7336DXS0 Installation Instructions And Use & Care Manual - Page 8

Browse online or download pdf Installation Instructions And Use & Care Manual for Ventilation Hood Whirlpool GXW7336DXS0. Whirlpool GXW7336DXS0 28 pages. 30" (76.2 cm) and 36" (91.4 cm) wall-mount canopy range hood

Print Page

Install Range Hood

1. Using 2 or more people, hang range hood on 2 mounting
screws through the mounting slots on back of hood.
A
A. Mounting screws
B. Mounting slots
C. Lower mounting screws
2. Remove the grease filter. See "Range Hood Care" section.
3. Level the range hood and tighten upper mounting screws.
4. Install 2 - 5 x 45 mm lower mounting screws and tighten.

Connect Vent System

1. Install transition on top of hood (if removed for shipping) with
2 - 3.5 x 6.5 mm sheet metal screws.
A
B
A. Vent transition
B. 3.5 x 6.5 mm screw
2. Fit vent system over transition piece.
3. Seal connection with clamps.
4. Check that back draft dampers work properly.
8
B
1. Disconnect power.
2. Remove terminal box cover.
C
3. Remove the knockout in the terminal box and install a UL
4. Run home power supply wiring through ¹⁄₂" strain relief into
5. Use UL listed wire connectors and connect white wires (B)

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
listed or CSA approved ¹⁄₂" strain relief.
terminal box.
E
D
C
B
A
A. UL listed wire connectors
B. White wires
C. Black wires
D. Green (or bare) wire connected to
yellow-green wires
E. Home power supply
together.