Whirlpool UXG7480VDS0 Use & Care Manual - Page 10

Browse online or download pdf Use & Care Manual for Ventilation Hood Whirlpool UXG7480VDS0. Whirlpool UXG7480VDS0 28 pages. 30" (76.2cm), 36" (91.4cm) and 48" (121.9cm) wall-mount canopy grill vent hood installation instructions

Print Page

To Remove

Metal Grease Filters

1. Turn off fan and lights. Check that halogen lamp is cool.

Using the filter handles, pull filter towards the front of the grill

vent hood.

A. Filter handles

B. Front edge of filter

C. Back edge of filter

2. Pivot the back edge of the filter towards the back of the grill

vent hood.

3. Drop the front edge of the filter down and remove.

To Replace

Metal Grease Filters

1. Insert the back edge filter into the filter opening.

2. Place the front edge up into place in the channel and firmly

press forward, depressing the springs while positioning

the

back edge of the filter into place in the rear channel.

METAL GREASE TRAYS

Metal grease trays should be cleaned along with the metal grease

filters.

To Clean:

Remove metal grease filters. See "Metal Grease Filters"

section.

Remove grease trays from the back channel as shown in

following illustration. Clean and replace.

Turn off the grill vent hood and allow the halogen lamp to cool.

Replace using the light bulb removal tool (provided).

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service.

1. Disconnect

power.

2. Using the light bulb removal tool, twist the halogen bulb

counterclockwise

to remove.

3. Replace with a GU10, 120-volt, 35-watt, halogen lamp.

Check that the 2 pins on the light bulb are properly inserted in

the lamp holder socket holes.

4. Using the light bulb removal tool, replace halogen bulb by

twisting it clockwise into the socket.

5. Reconnect power.

A. Grease tray

B. Back channel of grill vent hood