Whirlpool UXT4236AYW0 Installation Instructions And Use & Care Manual - Page 4
Browse online or download pdf Installation Instructions And Use & Care Manual for Ventilation Hood Whirlpool UXT4236AYW0. Whirlpool UXT4236AYW0 36 pages. 30" (76.2 cm) and 36" (91.4 cm) range hoods
Print Page
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed (all models)
•
Drill
•
1V4" (3.0 cm) drill bit
•
1/8"(3.0 mm) drill bit for pilot holes
•
Pencil
•
Wire stripper or utility knife
•
Tape measure or ruler
•
Caulking gun and weatherproof
caulking compound
•
Flat-blade screwdriver
•
Phillips screwdriver
•
Saber or keyhole saw
•
Metal snips
•
Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
•
T-10 Torx ®tadapter
•
T-20 Torx ®tadapter
•
4- 4.5 x 13 mm mounting screws
Parts Needed
(all models)
•
3 - UL listed wire connectors
•
Vent clamps/duct
tape as required
For cabinets
with recessed
bottoms:
•
Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
•
Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Parts needed
•
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
•
Wall or roof cap with damper to match vent system
•
1 - 75W max, 120V incandescent
light bulb
Models UXT4030AY/UXT4036AY
(recirculation installation only)
Parts needed
•
1 - 75W max, 120V incandescent light bulb
Models
UXT4230AY/UXT4236AY
(vented or non-vented
[recirculation]
installation)
Parts supplied
Remove parts from package. Check that all parts are included.
•
2 - 3.5 x 9.5 mm screws
•
31/4"x 10" (8.3 x 25.4 cm) rectangular vent connector
Parts needed
•
1 - 75W max, 120V incandescent
light bulb
•
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
•
7" (17.8 cm) round metal vent sytem
•
7" (17.8 cm) round damper. For information on ordering, see
the "Accessories"
section.
•
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the "Accessories" section.
For 31/4 '' x 10" (8.3 x 25.4 cm) rectangular
vented installations:
•
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
•
Charcoal filter kit. For information on ordering, see the
"Accessories"
section.
Models
UXT2030AY/UXT2036AY
(vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
•
2 - 3.5 x 9.5 mm screws
•
7" (17.8 cm) round vent mounting plate
Parts needed
•
7" (17.8 cm) round metal vent system
•
Wall or roof cap with damper to match vent system
•
1 - 75W max, 120V incandescent
light bulb
Models
UXT3030AY/UXT3036AY
(vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
•
2 - 3.5 x 9.5 mm screws
•
31/4"x 10" (8.3 x 25.4 cm) rectangular vent connector
Models UXT5230AY/UXT5236AY
(vented or non-vented [recirculation] installation)
Parts supplied
Remove parts from package. Check that all parts are included.
•
2 - 3.5 x 9.5 mm screws
•
31/4"x 10" (8.3 x 25.4 cm) rectangular damper/vent
connector
Parts needed
•
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
•
7" (17.8 cm) round metal vent sytem
•
7" (17.8 cm) round damper. For information on ordering, see
the "Accessories"
section.
•
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the "Accessories" section.
For 31/4 '' x 10" (8.3 x 25.4 cm) rectangular
vented installations:
•
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
•
Charcoal filter kit. For information on ordering, see the
"Accessories"
section.
1-®TORX is a registered trademark
of Saturn Fasteners,
Inc.