Whirlpool WCO6FMS Instructions For Use Manual - Page 4
Browse online or download pdf Instructions For Use Manual for Ventilation Hood Whirlpool WCO6FMS. Whirlpool WCO6FMS 12 pages. Slim hood
Print Page
By ensuring this product is disposed correctly, you will help prevent
negative consequences for the environment and human health which
could otherwise be caused by inappropriate waste handling.
The symbol on the product indicates that this product may not be
treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. Disposal must be carried out in accordance
with local environmental regulations for waste disposal. For more
detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Installation
The right position of the hood should be 65cm above the level of
your electrical hob or 75cm (see picture 3 & 4 ) if there are gas hobs.
The installation must take place accordingly .
holders. Do not use lamps of power more than 40W as they cause lo cal
overheating.
In order to avoid possible noise from shocks, we suggest you
put a foam rubber tape on the back side, between the
absorber plate and the wall or the upper side between the absorber plate
and the closet, depending on how you set your hood.
Installation drawings are shown in following pages.
Put 40W lamp in the lamp
4